Enable Console Login; Assigning Ip Address; Save And Reboot; Save Current Settings - ZyXEL Communications ZyXEL EES-1024AF User Manual

The SMT will return to the Device Settings screen. You should see your new user name and the password will be
shown as "********".
4.4.2

Enable Console Login

ZyXEL strongly recommend that you enable the console login feature for security.
In the Device Settings menu, Enter 8 to select the Console Login Enabled option.
Step 1.
Enter "y" at the "Input Yes or No (Y, N):" prompt.
Step 2.
4.4.3

Assigning IP Address

Once you have logged into the switch, you need to assign an IP address to the Ethernet Interfaces of the switch so
that you can connect to and manage the switch using a web browser. Follow the steps to assign an IP address to
your switch:
In the Device Settigns menu, enter 4 to select IP Address.
Step 1.
Enter a unique IP address for the switch, and then press [ENTER]. ( Default IP address is 192.168.1.1 )
Step 2.
Enter 5 to select Subnet Mask, and enter the subnet mask ( IP Net mask ) address. ( Default subnet
Step 3.
Mask is 255.255.255.0 )
Enter 6 to Select Default Gateway, and enter the IP address of the default gateway if you are sending
Step 4.
packets to another IP network. ( Default Gateway is 192.168.16. 254 )
The gateway address is the router that can forward packets to the other IP networks
Return to the main menu to execute S (Save Current Settings) and R (Reboot System) to make your new settings
take effect.

4.5 Save and Reboot

Once you have make new changes using the SMT you have to save the new settings and reboot your switch.
4.5.1

Save Current Settings

You must save the new settings to the switch before rebooting. Follow the steps to save the current settings.
Enter "s" from the SMT main menu.
Step 1.
Enter "y" at the prompt to continue saving and press [ENTER]. Once you save the current settings to the
Step 2.
switch, you will not be able to get back the old settings. Enter "n" to cancel.
Wait for a moment. The SMT will return to the main menu after the saving the current settings.
Step 3.
Introducing the SMT
EES-1024AF Intelligent Ethernet Switch Optional Modules Guide
.
4-5