Configure Secure Ip Addresses; General Setup Complete; Figure 5-8 Smt - Secure Ip; Table 5-3 Fields In Secure Ip - ZyXEL Communications ZyXEL EES-1024AF User Manual

5.8 Configure Secure IP Addresses

When the secure IP for Telnet or HTTP is enabled, only those IP address(es) specified in this screen will be able to
Telnet to the switch or login using the Web Configurator. You can specify up to 4 IP addresses. If either secure IP
feature is enabled without specifying an IP address, no device will be able to log into the switch using that login
method.
Enabling the secure IP feature will not affect console port login.
ZyXEL recommend that you enable the Secure IP for HTTP option if the switch is on the public
Enter "i" from the main menu to bring up the Secure IP screen.
#
Secure IP for
1
Telnet
Secure IP for
2
HTTP
Secure IP 1 .. 4
3 .. 6
Press "q" to exit this menu.

5.9 General Setup Complete

The SMT allows you to configure basic settings of the switch. Use the embedded Web Configurator to configure
advanced settings as described next.
General Setup Using the SMT
Figure 5-8 SMT – Secure IP
[Main] [Secure IP]
1. Secure IP for Telnet:
2. Secure IP for HTTP:
3. Secure IP 1:
4. Secure IP 2:
5. Secure IP 3:
6. Secure IP 4:
Q. Quit
Note: We suggest that you enable the HTTP
option if the management CPU
uses an Internet real IP
Select one function (1-6, Q):

Table 5-3 Fields in Secure IP

FIELD
Select this option and enable or disable the
secure IP for Telnet sessions.
Select this option and enable or disable the
secure IP for HTTP sessions.
Select these options to specify secure IP
address(es)
EES-1024AF Intelligent Ethernet Switch
network.
Enabled
Enabled
192.168.1.10
DESCRIPTION EXAMPLE
Enabled
Enabled
192.168.1.10
5-5