Configuration And Firmware Maintenance; Save And Reboot; Save; Reboot - ZyXEL Communications ZyXEL EES-1024AF User Manual

Configuration and Firmware Maintenance

This chapter shows you how to save, reboot, reset and upgrade new firmware to the switch using the

8.1 Save and Reboot

8.1.1

Save

You can save current settings by selecting Current Settings then clicking Apply next to the checkbox. You should
reboot the system so that your current settings will take effect.
8.1.2

Reboot

If you want to reboot the switch, select Reboot System then click Apply next to the checkbox. Wait for about 30
seconds before you continue to use the Web Configurator.

8.2 Reset to Factory Default Settings

If you want to use the factory default settings, select Factory Default Settings then click Apply next to the
checkbox. You should reboot the system so that the factory default settings will take effect.
Resetting to factory default settings erases your custom configuration.
Configuration and Firmware Maintenance
EES-1024AF Intelligent Ethernet Switch
Chapter 8
Web Configurator.
8-1