Initial Screen; Telnet; Ssh - ZyXEL Communications ZyXEL Dimension ES-2024 User Manual

ES-2024 Series User's Guide
• VT100 terminal emulation
• 9600 bps
• No parity
• 8 data bits
• 1 stop bit
• No flow control

30.2.2.1 Initial Screen

When you turn on your switch, it performs several internal tests as well as line initialization.
You can view the initialization information using the console port. After the initialization, the
login screen displays.
Copyright (c) 1994 - 2006 ZyXEL Communications Corp.
initialize switch, ethernet address: 00:13:49:00:00:01
Initializing VLAN Database...
Initializing IP Interface...
Initializing Advanced Applications...
Initializing Command Line Interface...
Initializing Web Interface...
Press ENTER to continue...

30.2.3 Telnet

Use the following steps to telnet into your switch.
1 Make sure your computer IP address and the switch IP address are on the same subnet. In
Windows, click Start (usually in the bottom left corner), Run and then type
192.168.1.1
2 A login screen displays.

30.2.4 SSH

You can use an SSH client program to access the switch. The following figure shows an
example using a text-based SSH client program. Refer to the documentation that comes with
your SSH program for information on using it.
183
(the default management IP address) and click OK.
Chapter 30 Introducing the Commands
telnet