Reboot Your Ees-1024Af; Resetting The Ees-1024Af; Figure 4-7 Smt - Save Current Settings; Figure 4-8 Smt - Reboot System - ZyXEL Communications ZyXEL EES-1024AF User Manual

EES-1024AF Intelligent Ethernet Switch
4.5.2

Reboot Your EES-1024AF

Follow the steps to reboot the switch. Rebooting will make all new settings take effect.
Enter "r" from the SMT main menu.
Step 1.
Enter "y'" at the prompt to continue the reboot process. Otherwise enter "n" to return to the main menu.
Step 2.
Wait for about 30 seconds before the SMT prompts you to log in again.
Step 3.

4.6 Resetting the EES-1024AF

You can reset the switch to the factory default values. All your custom configurations will be lost except the IP
address of the switch.
Enter "d" from the main menu.
Step 1.
Enter "y" to continue the reset process. Otherwise enter "n" to returnt to the main menu.
Step 2.
Wait for a moment while the switch reboots and prompts you to log in again.
Step 3.
4-6
[Main] [Save Current Settings]
Are you sure? (Y, N): y
save current settings...
done...
Figure 4-7 SMT – Save Current Settings
[Main] [Reboot System]
Are you sure? (Y, N): y
reboot system.
24-port 10/100Base-TX + 2 expansion modules switch is
starting...

Figure 4-8 SMT - Reboot System

Introducing the SMT