Remote Management; Figure 92 Access Control: Service Access Control; Table 57 Access Control: Service Access Control - ZyXEL Communications ZyXEL Dimension ES-2048 User Manual

ES-2048 User's Guide

Figure 92 Access Control: Service Access Control

The following table describes the fields in this screen.

Table 57 Access Control: Service Access Control

LABEL
Services
Active
Service Port
Timeout
Apply
Cancel

24.11 Remote Management

From the Access Control screen, display the Remote Management screen as shown next.
You can specify a group of one or more "trusted computers" from which an administrator may
use a service to manage the switch. Click Access Control to return to the Access Control
screen.
188
DESCRIPTION
Services you may use to access the switch are listed here.
Select this option for the corresponding services that you want to allow to access the
switch.
For Telnet, SSH, FTP, HTTP or HTTPS services, you may change the default service
port by typing the new port number in the Server Port field. If you change the default
port number then you will have to let people (who wish to use the service) know the new
port number for that service.
Type how many minutes a management session (via the web configurator) can be left
idle before the session times out. After it times out you have to log in with your
password again. Very long idle timeouts may have security risks.
Click Apply to save your changes to the switch's run-time memory. The switch loses
these changes if it is turned off or loses power, so use the Save link on the top
navigation panel to save your changes to the non-volatile memory when you are done
configuring.
Click Cancel to reset the fields.
Chapter 24 Access Control