Disable Vlan; Show Vlan Setting - ZyXEL Communications ZyXEL Dimension ES-2048 User Manual

35.5 Disable VLAN

Syntax:
vlan <vlan-id> inactive
This command disables the specified VLAN ID in the SVLAN (Static VLAN) table.

35.6 Show VLAN Setting

Syntax:
show vlan
This command shows the IEEE 802.1Q Tagged SVLAN (Static VLAN) table.
An example is shown next.
• VID is the VLAN identification number.
• Status shows whether the VLAN is static or active.
• Elap-Time is the time since the VLAN was created on the switch.
• The TagCtl section of the last column shows which ports are tagged and which are
untagged.
sysname# show vlan
The Number of VLAN:
Idx. VID
---- ----
1 1
1 100
1 200
Chapter 35 IEEE 802.1Q Tagged VLAN Commands
3
Status Elap-Time
-------- ------------ ------------------------
Static 0:12:13
Static 0:00:17
Static 0:00:07
TagCtl
Untagged :1-2
Tagged :
Untagged :
Tagged :1-4
Untagged :1-2
Tagged :3-8
ES-2048 User's Guide
277