ZyXEL Communications ZyXEL Dimension ES-2048 User Manual page 230

ES-2048 User's Guide
Table 73 Command Summary: Configuration Mode (continued)
COMMAND
unknown-
multicast-frame
<drop|flooding>
reserved-
multicast-group
<drop|flooding>
igmp-
filtering
profile <name>
start-address
<ip> end-address
<ip>
interface port-channel
<port-list>
spq
wfq
wrr
fe-spq
<q0|q1|..|
q7>
ip route
name-server
address default-
gateway
address
mac- name <name> mac
forward <mac-addr> vlan
<vlan-id>
interface
<interface-id>
228
DESCRIPTION
Sets how to treat traffic from
unknown multicast group.
Sets how to treat traffic belonging
to reserved multicast groups.
Enables IGMP filtering on the
switch.
Sets the range of multicast
address(es) in a profile.
Enables a port or a list of ports for
configuration. See
31.11.4 on page 233
details.
Sets the queuing method to SPQ
(Strictly Priority Queuing).
Sets the queuing method to WFQ
(Weighted Fair Queuing).
Sets the queuing method to WRR
(Weighted Round Robin).
Sets the switch to use SPQ to
service the subsequent queue(s)
after and including the specified
queue for the 10/100 Mbps
Ethernet ports.
Creates a static route.
<ip> <mask>
<next-hop-ip>
<ip> <mask> Sets the metric of a static route or
deactivates a static route.
<next-hop-ip>
[metric
<metric>]
[name <name>]
[inactive]
Sets the IP address of a domain
<ip>
name server.
Sets the default gateway's IP
<ip>
address for the out-of-band
management port.
Sets the IP address and subnet
<ip> <mask>
mask of the out-of-band
management port.
Configures a static MAC address
forwarding rule.
PRIVILEGE
13
13
13
13
13
Section
for more
13
13
13
13
13
13
13
13
13
13
Chapter 31 Introducing Commands