Clustering Management Configuration; Figure 100 Example: Uploading Firmware To A Cluster Member Switch; Table 65 Ftp Upload To Cluster Member Example - ZyXEL Communications ZyXEL Dimension ES-2048 User Manual

Figure 100 Example: Uploading Firmware to a Cluster Member Switch

C:\>ftp 192.168.1.1
Connected to 192.168.1.1.
220 ES-2048 FTP version 1.0 ready at Thu Jan
User (192.168.0.1:(none)): admin
331 Enter PASS command
Password:
230 Logged in
ftp> ls
200 Port command okay
150 Opening data connection for LIST
--w--w--w- 1 owner
-rw-rw-rw- 1 owner
--w--w--w- 1 owner
-rw-rw-rw- 1 owner
226 File sent OK
ftp: 297 bytes received in 0.00Seconds 297000.00Kbytes/sec.
ftp> bin
200 Type I OK
ftp> put 370lt0.bin fw-00-a0-c5-01-23-46
200 Port command okay
150 Opening data connection for STOR fw-00-a0-c5-01-23-46
226 File received OK
ftp: 262144 bytes sent in 0.63Seconds 415.44Kbytes/sec.
ftp>
The following table explains some of the FTP parameters.

Table 65 FTP Upload to Cluster Member Example

FTP PARAMETER
User
Password
ls
360lt0.bin
fw-00-a0-c5-01-23-46
config-00-a0-c5-01-23-46 This is the cluster member switch's configuration file name as seen

27.3 Clustering Management Configuration

Click Configuration from the Cluster Management screen to display the next screen. Use
this screen to configure cluster management.
Chapter 27 Cluster Management
group 3042210 Jul 01 12:00 ras
group 393216 Jul 01 12:00 config
group
group
DESCRIPTION
Enter "admin".
The web configurator password default is 1234.
Enter this command to list the name of cluster member switch's
firmware and configuration file.
This is the name of the firmware file you want to upload to the
cluster member switch.
This is the cluster member switch's firmware name as seen in the
cluster manager switch.
in the cluster manager switch.
1 00:58:46 1970
0 Jul 01 12:00 fw-00-a0-c5-01-23-46
0 Jul 01 12:00 config-00-a0-c5-01-23-46
ES-2048 User's Guide
201