Ip Setup; Management Ip Addresses - ZyXEL Communications ZyXEL Dimension ES-2048 User Manual
Intelligent layer 2 switch 48-port fast ethernet+ 2gbe dual personality interfaces
Hide thumbs
Also See for ZyXEL Dimension ES-2048:
- User manual (306 pages) ,
- Release note (4 pages) ,
- Declaration of conformity (1 page)
Table of Contents
Advertisement
ES-2048 User's Guide
7.6 IP Setup
Use the IP Setup screen to configure the default gateway device, the default domain name
server and add switch IP address.
7.6.1 Management IP Addresses
The switch needs an IP address for it to be managed over the network. The factory default IP
address is 192.168.1.1. The subnet mask specifies the network number portion of an IP
address. The factory default subnet mask is 255.255.255.0.
You can configure up to 64 IP addresses which are used to access and manage the switch from
the ports belonging to the pre-defined VLAN(s).
Note: You must configure a VLAN first.
74
Chapter 7 Basic Setting
Advertisement
Table of Contents
Troubleshooting
