Configure Rapid Spanning Tree Protocol - ZyXEL Communications ZyXEL Dimension ES-2048 User Manual

ES-2048 User's Guide
Table 24 Spanning Tree Protocol: Status (continued)
LABEL
Forwarding Delay
(second)
Cost to Bridge
Port ID
Topology Changed
Times
Time Since Last
Change

11.3 Configure Rapid Spanning Tree Protocol

Use this screen to configure RSTP settings, see
on RSTP. Click the Configuration link in the Rapid Spanning Tree Protocol Status screen
as shown next.
108
DESCRIPTION
This is the time (in seconds) the root switch will wait before changing states (that
is, listening to learning to forwarding).
This is the path cost from the root port on this switch to the root switch.
This is the priority and number of the port on the switch through which this switch
must communicate with the root of the Spanning Tree.
This is the number of times the spanning tree has been reconfigured.
This is the time since the spanning tree was last reconfigured.
Section 11.1 on page 105
Chapter 11 Spanning Tree Protocol
for more information