This chapter discusses static IP and MAC address port filtering.
10.1 Filtering Overview
Port filtering means discarding (or dropping) packets based on the MAC addresses and VLAN
group.
10.2 Configure a Filtering Rule
Click Advanced Application and Filtering in the navigation panel to display the screen as
shown next.
Figure 41 Filtering
The following table describes the related labels in this screen.
Table 20 Filtering
LABEL
Active
Name
MAC
VID
Chapter 10 Filtering
DESCRIPTION
Make sure to select this check box to activate your rule. You may temporarily deactivate
a rule without deleting it by deselecting this check box.
Type a descriptive name (up to 32 printable ASCII characters) for this rule. This is for
identification purpose only.
Type a MAC address in valid MAC address format, that is, six hexadecimal character
pairs.
Type the VLAN group identification number.
ES-2024 Series User's Guide
C
H A P T E R
1 0
Filtering
92