Table of Contents
Advertisement
Figure 27. Cable routing, AnyBay backplane with two processors installed
Table 22. Cables and adapters for routing
PCIe switch card
1
SATA/SAS RAID adapter (8i)
2
Four processors installed
Note: Install the processor and memory expansion tray before connecting the signal cables to NVMe
connectors on the expansion tray (see
ThinkSystem SR850 Setup Guide
34
NVMe signal cables for PCIe switch card
3
SATA/SAS signal cables (720 mm)
4
"Install the processor and memory expansion tray" on page
107).
Advertisement
Table of Contents
