Table of Contents
Advertisement
Example command is as follows:
onecli config set SYSTEM_PROD_DATA.SysEncloseAssetTag <asset_tag>
Note: The KCS access method uses the IPMI/KCS interface, which requires that the IPMI
driver be installed.
– Remote LAN access, type the command:
[−−bmc <xcc_user_id>:<xcc_password>@<xcc_external_ip>]
Where:
xcc_external_ip
The BMC/IMM/XCC IP address. There is no default value. This parameter is required.
xcc_user_id
The BMC/IMM/XCC account (1 of 12 accounts). The default value is USERID.
xcc_password
The BMC/IMM/XCC account password (1 of 12 accounts).
Note: BMC, IMM, or XCC internal LAN/USB IP address, account name, and password are all
valid for this command.
Example command is as follows:
onecli config set SYSTEM_PROD_DATA.SysEncloseAssetTag <asset_tag> −−bmc <xcc_user_id>:<xcc_
password>@<xcc_external_ip>
4. Reset the Lenovo XClarity Controller to the factory defaults. See "Resetting the BMC to Factory
Default" section in the XCC documentation compatible with your server at
.
lxcc-overview/
https://pubs.lenovo.com/
.
Chapter 4
System configuration
131
Advertisement
Table of Contents
