Table of Contents
Advertisement
Figure 61. Removing USB 3.0 connector vertically
To install the PCIe riser-card assembly, complete the following steps:
Step 1.
Assemble the PCIe riser-card assembly:
a.
Align the bottom of the PCIe riser-card to the slot, and rotate the top to fit it into the slot on the
riser-cage; then, move the PCIe riser-card slightly to fit the holes into the pins.
Figure 62. PCIe riser-card assembly
b.
Install the PCIe riser-card to the riser-cage with screws.
ThinkSystem SR850 Setup Guide
100
Advertisement
Table of Contents
