Installing The Lower Triple Clamp; (All Standard Models) - KTM 350 XCF-W 2022 Owner's Manual

12.11

Installing the lower triple clamp

Info
Cover the components to protect them against damage.
Do not kink the cables and lines.
–
Remove O-ring
–
Take off the lower triple clamp with the steering stem.
–
Remove the upper steering head bearing.
V01788-10

(All standard models)

Main work
–
Clean the bearing and sealing elements, check for damage,
and grease.
High viscosity grease (
–
Insert the lower triple clamp with the steering stem. Mount
upper steering head bearing.
–
Check whether upper steering head seal
tioned.
–
Slide on protective ring
B01605-10
–
Position the upper triple clamp with the handlebar.
–
Mount screw
–
Secure the wiring harness and the clutch line with the cable
holder.
V01785-11
SERVICE WORK ON THE CHASSIS 12
3 4
and protective ring
p. 171)
1
2 3
and O-ring
4
, but do not tighten yet.
.
is correctly posi-
.
69