Lubricating The Steering Head Bearing; Removing Front Fender - KTM 350 XCF-W 2022 Owner's Manual

12.16

Lubricating the steering head bearing

12.17

Removing front fender

Finishing work
–
Check the steering head bearing for play. (
–
Remove the motorcycle from the lift stand. (
(All standard models)
–
Remove the lower triple clamp.
–
Install the lower triple clamp.
Info
The steering head bearing is cleaned and lubri-
cated in the course of removal and installation of
the lower triple clamp.
(All special models)
H02387-01
–
Remove the lower triple clamp.
–
Install the lower triple clamp.
Info
The steering head bearing is cleaned and lubri-
cated in the course of removal and installation of
the lower triple clamp.
Preparatory work
–
Remove the headlight mask with the headlight. (
Main work
(All standard models)
–
Remove screws
V00340-10
–
Remove screws
V00341-10
SERVICE WORK ON THE CHASSIS 12
( p. 68)
( p. 69)
( p. 68)
( p. 71)
1
.
2
. Remove front fender.
p. 73)
p. 64)
p. 129)
75