KTM 350 XCF-W 2022 Owner's Manual page 52

Hide thumbs Also See for 350 XCF-W 2022:
Table of Contents

Advertisement

10 SERVICE SCHEDULE
Change the fuel filter.
Change the coolant. (
Perform engine service including removing and installing the engine. (Change the
spark plug and spark plug connector. Change the piston. Check/measure the cylin-
der. Check the cylinder head. Change the valves, valve springs, and valve spring
seats. Check the camshaft and cam lever. Change the connecting rod, conrod bear-
ing and crank pin. Change the radial shaft seal rings of the water pump. Check the
transmission and the shift mechanism. Check the oil pressure control valve. Change
the suction pump. Check the force pump and lubrication system. Check the timing
assembly. Change the timing chain. Change all engine bearings. Change the free-
wheel.)
One-time interval
Periodic interval
50
Every 70 operating hours when used for motorsports
p. 137)
every 12 months
Every 135 operating hours
After 20 operating hours
After 10 operating hours
every 48 months

Advertisement

Table of Contents
loading

Table of Contents