11.16
Handlebar position
Guideline
Air pressure
Gradual changing of the air
pressure in steps of
Minimum air pressure
Maximum air pressure
Info
Never adjust the air pressure to a value outside the
stated range.
–
Disconnect the fork airpump from the left fork leg.
When disconnecting, excess pressure will escape from the
hose – the fork leg itself does not lose any air.
The fork airpump indicator switches off automatically after
80 seconds.
–
Mount the protection cap.
Info
Only mount the protection cap by hand.
Finishing work
–
Remove the motorcycle from the lift stand. (
(All standard models)
On the upper triple clamp, there are 2 holes at a distance
A
of
to each other.
Hole distance
The holes on the handlebar supports are placed at a distance
B
of
from the center.
Hole distance
The handlebar holders can be mounted in four different posi-
tions.
M00993-10
TUNING THE CHASSIS 11
7 bar (102 psi)
0.2 bar (3 psi)
6.8 bar (99 psi)
7.2 bar (104 psi)
15 mm (0.59 in)
A
3.5 mm (0.138 in)
B
p. 64)
61