13 BRAKE SYSTEM
106
–
Correct the brake fluid level to level
Guideline
A
Level
below reservoir rim)
Brake fluid DOT 4 / DOT 5.1 (
–
Position cover
1
screws
Info
Use water to immediately clean up any brake fluid
that has overflowed or spilled.
V01770-10
(XCF‑W)
–
Move the brake fluid reservoir mounted on the handlebar to
a horizontal position.
–
Remove screws
–
Take off cover
–
Manually press the brake caliper toward the brake disc to
push back the brake pistons. Ensure that brake fluid does
not flow out of the brake fluid reservoir; extract some if
necessary.
V01773-10
Info
Make sure that you do not press the brake caliper
against the spokes when pushing back the brake
pistons.
–
Remove cotter pin
brake linings.
–
Clean the brake caliper and the brake caliper bracket.
E00344-10
A
5 mm (0.2 in)
(brake fluid level
p. 169)
2
3
with membrane
. Mount and tighten
.
1
.
2
3
with membrane
.
4
5
, pull out pin
, and remove the
.