Table of Contents
Advertisement
Controls System
Maintenance
Converting the
Speedometer
You can convert the speedometer from mph to kpm
or kph to mph.
1.
Position the machine on a level surface, shut
off the engine, engage the parking brake, and
remove the key.
2.
Remove the hood.
3.
Locate the 2 loose wires next to the meter
(Figure
78).
Figure 78
1. meter (forward face)
2. Plug
4.
Remove the connector plug from the harness
wire and connect the wires together
Note:
The meter switches from mph to
kph. Retain the plug in order to convert the
speedometer to mph.
5.
Install the hood.
g024896
3. Speedometer wires
(Figure
78).
Hydraulic System
Maintenance
Hydraulic System Safety
•
Seek immediate medical attention if fluid is injected
into skin. Injected fluid must be surgically removed
within a few hours by a doctor.
•
Before disconnecting or performing any work on
the hydraulic system, relieve all pressure in the
system by shutting off the engine, cycling the
dump valve from raise to lower, and/or lowering
the cargo bed and attachments. Place the remote
hydraulics lever in the float position. Do not work
under a raised bed without the proper bed safety
support in place.
•
Ensure that all hydraulic-fluid hoses and lines are
in good condition and that all hydraulic connections
and fittings are tight before applying pressure to
the hydraulic system.
•
Keep your hands and body away from pinhole
leaks or nozzles that eject high-pressure hydraulic
fluid.
•
Use cardboard or paper to find hydraulic leaks.
Checking the
Hydraulic-Fluid Level
Service Interval: Before each use or daily—Check
the hydraulic-fluid level. (Check
the level of hydraulic fluid before
the engine is first started and daily
thereafter.)
Hydraulic-fluid type: Mobil M15
Hydraulic-fluid capacity: (Non-TC model): 7.5 L (2
US gallons)
Hydraulic-fluid capacity: (Non-TC model with the
High-Flow-Hydraulic Kit (optional kit) or TC Model):
15.1 L (4 US gallons)
57
Advertisement
Table of Contents
