Table of Contents
Advertisement
After Operation
After Operation Safety
General Safety
•
Allow the engine to cool before storing the machine
in any enclosure.
•
Do not store the machine or fuel container where
there is an open flame, spark, or pilot light, such
as on a water heater or other appliance.
•
Keep all parts of the machine in good working
condition and all hardware tightened.
•
Replace all worn, damaged, or missing decals.
Transporting the Machine
•
Use care when loading or unloading the machine
into a trailer or a truck.
•
Use full-width ramps for loading the machine into
a trailer or a truck.
•
Tie the machine down securely.
Refer to
Figure 26
and
locations on the machine.
Note:
Load the machine on the trailer with the front
of the machine facing forward. If that is not possible,
secure the machine hood to the frame with a strap,
or remove the hood and transport and secure it
separately; otherwise, the hood may blow off during
transport.
Figure 26
1. Eye hole in the frame (each side)
Figure 27
for the tie-down
1. Axle
g009820
29
Figure 27
2. Hitch plate
g009821
Advertisement
Table of Contents
