IBM x 340 Series Hardware Maintenance Manual page 133

Error Code/Symptom
00180400 (No more memory (below
1MB for PCI adapter)
00180500 (PCI option ROM
checksum error)
00180600 (PCI to PCI bridge error)
00180700, 00180800 (General PCI error) 1.
01295085 (ECC checking hardware
test error)
01298001 (No update data for
processor 1)
01298002 (No update data for
processor 2)
01298101 (Bad update data for
processor 1)
01298102 (Bad update data for
processor 2)
I9990301 (Fixed boot sector error)
I9990305 (Fixed boot sector error, no
operating system installed)
(AC power has been
I9990650
restored)
1. Run Configuration/Setup
2. Move the failing adapter to slot 1 or 2
3. Failing Adapter
4. System Board
1. Remove Failing PCI Card
2. System Board
1. Run Configuration/Setup
2. Move the failing adapter to slot 1 or 2
3. Failing Adapter
4. System Board
System Board
2. PCI Card
1. System Board
2. Processor
1. Ensure all processors are the same stepping level and cache size.
2. Processor 1
1. Ensure all processors are the same stepping level and cache size.
2. Processor 2
1. Ensure all processors are the same stepping level and cache size.
2. Processor 1
1. Ensure all processors are the same stepping level and cache size.
2. Processor 2
1. Hard Disk Drive
2. SCSI Backplane
3. Cable
4. System Board
1. Install operating system to hard disk drive.
1.
Check cable
2. Check for interruption of power supply
3. Power Cable
FRU/Action
Symptom-to-FRU index
125