IBM x 340 Series Hardware Maintenance Manual page 130

Error Code/Symptom
229 (Cache error)
262 (DRAM parity configuration
error)
289 (DIMM has been disabled the user
or system, see "Memory Settings" on page
33.)
301 (Keyboard or keyboard controller
error)
303 (Keyboard controller error)
602 (Invalid diskette boot record)
604 (Diskette drive error)
605 (Unlock failure)
662 (Diskette drive configuration error)
762 (Coprocessor configuration error)
962 (Parallel port error)
11XX (System board serial port 1 or 2
error)
0001200 (Machine check architecture
error)
122
Hardware Maintenance Manual: xSeries 340 Model 6RY
1. Processor
2. Optional Processor (if installed)
1. Run configuration / setsup
2. Battery
3. System Board
1. Run Configuration/Setup, if disabled by user
2. Disabled DIMM, if not disabled by user.
1. Keyboard
2. System Board
1. System Board
1. Diskette
2. Diskette Drive
3. Cable
4. System Board
1. Run Configuration/Setup and Diagnostics
2. Diskette Drive
3. Drive Cable
4. System Board
1. Diskettee Drive
2. Drive Cable
3. System Board
1. Run Configuration/Setup and Diagnostics
2. Diskette Drive
3. Drive Cable
4. System Board
1. Run configuration setup
2. Battery
3. Processor
1. Disconnect external cable on parallel port.
2. Run Configuration/Setup
3. System Board
1. Disconnect external cable on serial port.
2. Run Configuration/Setup
3. System Board
1. Processor 1
2. Optional Processor 2
FRU/Action