IBM x 340 Series Hardware Maintenance Manual page 126

Error Code/Symptom
217-XXX-000 (Failed BIOS Fixed
Disk test)
If RAID is configured, the fixed
Note:
disk number refers to the RAID
logical array
(Failed BIOS Fixed Disk
217-XXX-001
test)
Note: If RAID is configured, the fixed
disk number refers to the RAID
logical array
217-XXX-002 (Failed BIOS Fixed Disk
test)
Note: If RAID is configured, the fixed
disk number refers to the RAID
logical array
217-XXX-003 (Failed BIOS Fixed Disk
test)
Note: If RAID is configured, the fixed
disk number refers to the RAID
logical array
217-XXX-004 (Failed BIOS Fixed Disk
test)
Note: If RAID is configured, the fixed
disk number refers to the RAID
logical array
264-XXX-0NN (Failed Tape Drive
test)
(Errors on multiple tape
264-XXX-999
drives, see error text for more info)
301-XXX-000 (Failed Keyboard test)
405-XXX-000 (Failed Ethernet test
on controller on the System Board)
405-XXX-00N (Failed Ethernet test on
adapter in PCI slot N)
415-XXX-000 (Failed Modem test)
118
Hardware Maintenance Manual: xSeries 340 Model 6RY
1. Fixed Disk 1
1.
Fixed Disk 2
1. Fixed Disk 3
1. Fixed Disk 4
1. Fixed Disk 5
1. Tape Cartridge, if user executed the Read/Write Tape Drive test
(failure code of XXX = 256)
2. SCSI or Power Cable connected to tape drive with SCSI ID NN.
3. Tape Drive with SCSI ID NN. (Refer to the Help and Service
Information appendix of the tape drive's User Guide.)
4. System Board or SCSI Controller. (Run SCSI Controller Diagnostic to
determine if the SCSI bus is functioning properly.)
1.
See error messages/text in the PC Doctor error log for detailed
information on each individual tape drive error.
1. Keyboard
1. Verify that Ethernet is not disabled in BIOS.
2. System Board
1. Adapter in PCI slot N.
2. System Board
1. Cable
Note: Ensure modem is present and attached to server.
2. Modem
3. System Board
FRU/Action