Displaying Signal Information; Deactivate And Activate Hbbtv; Deactivate And Activate Digital Teletext - Grundig Fine Arts 55 FLX 9491 SL Manual

Lcd tv with led backlight
Table of Contents

Advertisement

sPeCIal­seTTInGs
Displaying­signal­information
(only for digital television channels)
1 Open the menu with »MenU«.
2 Activate the menu item »Settings« with
»oK«.
3 Select the menu item »Source Setup« with
>
<
»
« or »
« and press »oK« to confirm.
– » Source Setup« menu is displayed.
4 Select the line »Advanced« with »
»
« and press »oK« to confirm.
Λ
5 Select the line »Signal Information« with
»
« or »
« and press »oK« to confirm.
V
Λ
– » Signal Information« menu is displayed.
notes:
S ignal information changes depending on
7
the current source.
S ignal information is shown on the left of the
7
menu. The more »Frequency« and »Signal
Strength« bar stretches to the right, the more
signal you have.
T he signal level not only depends on your
7
receiver system, but also on the channel
which is currently active. Remember this
when aligning your antenna using the signal
level display.
6 Press »eXIT« to close the menu.
­ - ---------------------------------------------------------------------------------------
Deactivate­and­activate­HbbTV
This option allows turning off Hbb TV feature,
thus warnings shall not be displayed on chan-
nels with Hbb TV feature.
1 Open the menu with »MenU«.
2 Activate the menu item »Settings« with
»oK«.
3 Select the menu item »Source Setup« with
>
»
« or
V
– » Source Setup« menu is displayed.
4 Select the line »Advanced« with »
»
Λ
5 Select the line »Hbb TV« with »
6 Select the option (»Off«) with»
note:
T o activate HbbTV again, select in step. 6
7
the option »On«.
7 Press »eXIT« to end the setting.
Deactivate­and­activate­digital­
teletext
If you deactivate digital video text, only normal
video text can be selected, however the other
functions of the interactive service HbbTV are still
available.
1 Open the menu with »MenU«.
2 Activate the menu item »Settings« with
»oK«.
3 Select the menu item »Source Setup« with
>
»
– » Source Setup« menu is displayed.
4 Select the line »Advanced« with »
»
Λ
5 Select the line »Digital Teletext« with »
»
Λ
6 Select the option (»Off«) with»
note:
To reactivate digital teletext, select »On« in
7
step 6.
7 Press »eXIT« to end the setting.
<
« or »
« and press »oK« to confirm.
« and press »oK« to confirm.
<
« or »
« and press »oK« to confirm.
« and press »oK« to confirm.
«.
« or
V
« or »
«.
V
Λ
<
>
« or »
«.
« or
V
« or
V
<
>
« or »
«.
ENGLISH
95­

Advertisement

Table of Contents
loading

Table of Contents