ConVenIenCefUnCTIons
Resettingthetelevisiontoits
originalstate
This function enables you to delete the station
lists and all custom settings.
1 From the »About« menu use »
to select the line »Restore Factory Defaults«
and press »oK« to confirm.
– Warning screen will be displayed.
note:
If the loaded applications are also to be de-
7
leted, select the line »Installed applications«
by pressing »
Λ
with »oK«.
2 Press »
« (green) to confirm the reset func-
tion.
– I n a short while »Installation Guide« is
displayed.
3 Continue the settings as described in the
chapter on first installation and searching
for channels on page 16.
Deletingchannelhistory
This function allows you to delete channel history
stored in the Main menu.
1 From the »About« menu use »
select the line »Delete Channel History« and
press »oK« to confirm.
2 Press »
« (green) to confirm the reset func-
tion.
– T he preview images in the main menu are
deleted.
72
enGlIsH
« or »
V
« and remove the small tick
« or »
V
- -----------------------------------------------------------
Timersettings
1 Open menu with »MenU« button.
2 Activate the menu item »Settings« with
»oK«.
3 Select the menu item »Timer Apps« with »
«
Λ
<
or »
« and press »oK« to confirm.
– » Timer Applications« menu is displayed.
Parental Guidance
Sleep Timer
Auto On
Auto Off
Advanced
note:
Additional operations are explained in the
7
following sections.
sleeptimer
In the »Sleep Timer« menu you can enter a time
for the television to switch off. After this time
has elapsed, the television switches to standby
mode.
« to
Λ
1 Select the line »Sleep Timer« with »
»
«.
Λ
2
Select the switch-off time with »
note:
To switch off the function, use »
7
set the switch-off time to »Off«.
3 Press »baCK
level or press »eXIT« to end the setting.
ontimer
In the On Timer menu, you can enter a switch-on
time for the television.
The television switches on with the preset vol-
ume and the desired channel after the set time in
stand-by mode has elapsed.
1 Select the line »Auto On« with »
and press »oK« to confirm.
Network Configuration
Timer Applications
Change Area
Back
V
<
« or »
<
« or »
« to go back one menu
<
« or »
V
>
«
Off
Exit
« or
>
«.
>
« to
«
Λ