Grundig Fine Arts 55 FLX 9491 SL Manual page 34

3D­fUnCTIon
adjusting­2D­→­3D­effects
When you change 2D broadcasting to 3D, you
can adjust the most suitable effect depending on
your personal preferences.
1 Select the line »Effect mode« with »
» « and set it to »On« with »
Λ
– » 3D Perspective« and »Depth« options
are activated.
2 Select the line »3D Perspective« with »
or » « and adjust with »
Λ
3 Select the line »Depth« with »
and select the picture setting as »Low«,
»Medium« or »High« with »
4 Press »eXIT« to end the settings.
lR­Correction
When Frame Packing mode is enabled in HDMI
source, 3D perception may disappear in 3D
films or 3D games due to a synchronization shift
arising from HDMI signal. You may correct 3D
perception with this feature.
1 Select the line »LR Correction« with »
» «.
Λ
< >
2 Press »
« or » « to switch the function
»On«.
note:
Set the function to »Off« with »
7
3 Press »eXIT« to end the settings.
34­ ENGLISH
­----------------------------------------------------------------------------------------------------
« or
V
< >
« or » «.
«
V
< >
« or » «.
« or » «
V Λ
< >
« or » «.
« or
V
< >
« or » «.
formats­supported­with­HDMI­1.4
With HDMI 1.4, your TV can recognize and
play 3D contents. To exit 3D mode, turn off the
function by setting it to »Off« with »3D«. Formats
supported in 3D mode with HDMI 1.4 are pro-
vided in the following table.
film­content Frame Packing
Game­con- Frame Packing
tent
Side by Side
broadcast­
Horizontal
content
Top and Bot-
tom
1080p @
23.98/24Hz
720p @ 50 or
59.94/60Hz
1080i @ 50 or
59.94/60Hz
720p @ 50 or
59.94/60Hz
1080p @
23.97/24Hz