sPeCIalseTTInGs
automaticserviceupdate
If this function is activated, possible changes of
network operators are updated automatically.
The unit must be located in stand-by mode.
This updating affects all types of reception - ter-
restrial, cable and satellite.
1 Open the menu with »MenU«.
2 Activate the menu item »Settings« with
»oK«.
3 Select the menu item »Source Setup« with
>
<
»
« or »
« and press »oK« to confirm.
– » Source Setup« menu is displayed.
4 Select the line »Advanced Settings« with
»
« or »
« and press »oK« to confirm.
V
Λ
5 Select the line »Automatic Service Update«
with »
« or »
V
Λ
<
update with »
« or »
6 Press »eXIT« to end the setting.
92
ENGLISH
- ---------------------------------------------------------------------------------------
« and select the automatic
>
« (»On«).
Tuninganaloguetelevision
channels
This setting is only necessary if you cannot re-
ceive any digital channels and you have not car-
ried out an analogue search during initial setup.
The television channel can be set directly or
using the search.
settingallanaloguetelevision
channels
The analogue television stations are listed in the
channel list after the digital television stations.
note:
Plug the rooftop antenna cable (for ana-
7
logue television stations) into the »anTIn«
socket on the television.
1 Open the menu with »MenU«.
2 Activate the menu item »Settings« with
»oK«.
3 Select the menu item »Source Setup« with
>
<
»
« or »
« and press »oK« to confirm.
– » Source Setup« menu is displayed.
4 Select the line »Automatic Channel Search«
with »
« or »
« and press »oK« to con-
V
Λ
firm.
5 Select the option »Air« or »Cable« with »
>
or »
« and confirm the source you are re-
ceiving analog broadcast from by pressing
»oK«.
6
Select the option »Digital« with »
and press »OK« to remove the small tick.
7 Press »
« (red) to start searching.
notes:
After starting the scan, a security query will
7
appear. Press »
option »Yes«.
– A ll channel and favourites lists for the
analogue channels will be deleted and
compiled new.
– T he »Analog Searching« menu appears,
and the scan for TV channels begins.
Depending on the number of television
channels received, this can easily take a
few minutes.
– T he search is complete as soon as the
»Search is completed!« appears.
<
« or »
« (green) to confirm the
<
«
>
«