Table of Contents
Advertisement
neTWoRKseTUP
M anualconnection
Certain networks require Static IP address. If
your network requires a Static IP address, you
must enter the »IP Address«, »Netmask«, »Gate-
way« and »DNS« values manually. You can
get »IP Adress«, »Netmask«, »Gateway« and
»DNS« values (IPS) from your Internet Service
Provider.
1 Open the menu with »MenU«.
2 Activate the menu item »Settings« with
»oK«.
3 Select the menu item »Network Configura-
>
tion« with »
« or »
confirm.
– » Network configuration« menu is dis-
played.
4 Select the line »Change Connection Type«
»
« or »
« and press »oK« to confirm.
V
Λ
5 Select the option »Wired« with »
and press »oK« to confirm.
6 Select the line »Network Configuration«
with »
« or »
« sand use »
V
Λ
select »Manual«.
7 Select the line »Advanced« with »
»
« and press »oK« to confirm.
Λ
– » IP Address«, »DNS«, »Netmask« and
»Gateway« options are active.
Timer Applications
Network Configuration
Change Connection Type
Network Configuration
IP Address
DNS
Netmask
Gateway
Connect
Test Connection
8 Select the line »IP Address« with »
Enter IP address with »1...0«.
9 Select the line »DNS« with »
Enter IP address with »1...0«.
10 Select the line »Netmask« with »
Enter Netmask address with »1...0«.
11 Select the line »Gateway« with »
Enter Gateway address with »1...0«.
- ------------------------------------------------------------------------------------------
<
« and press »oK« to
<
« or »
<
>
« or »
« to
« or
V
TV Settings
Wired
Manual
192.168.000.164
192.168.000.001
255.255.254.000
192.168.000.001
Change Area
Back
«.
V
«.
V
«
V
«.
V
12 With »
« (red) select »Connect« option to
establish modem connection.
– » Connecting... Please wait« message will
be displayed, and if the connection is
successful, Connection to Gateway: Suc-
cessful« message will be displayed.
13 Press »
settings and also if the local network and
internet connection has been established.
– » Testing ... Please wait« message will
be displayed, and if the connection is
established »Connection To Gateway:
Success«, »Internet Connection: Success-
ful« message will be displayed.
14 Press »eXIT« to end the settings.
>
«
Exit
« (green) to check the performed
enGlIsH
37
Advertisement
Table of Contents
