Table of Contents
Advertisement
neTWoRKseTUP
8 Select the line »Select Access Point« with
»
« or »
« and press »oK« to confirm.
V
Λ
– P resent WPS-supported wireless networks
are scanned to display in the »Select Ac-
cess Point« menu.
9 Select the network that you want to connect
with »
«, »
«, »
V
Λ
»oK« to confirm.
– 8 -digit pin code is displayed in the wire-
less WPS menu.
note:
Refer to the manual of your router to find out
7
how the PIN is entered via a PC.
10 Use a PC to enter the pin on the router (e.g.
AVM FRITZ!Box: menu item WLAN Set-
tings... WPS) and save.
note:
The 8-digit PIN code must be entered in the
7
modem interface in 2 minutes; otherwise,
connection of television with the modem is
cut.
11 Press »
« (green) to confirm the registra-
tion.
– T he message "Connection to Gateway:
Success" appears.
12 Press »
« (green) to check the performed
settings and also if the local network and
internet connection has been established.
– » Testing ... Please wait« message will
be displayed, and if the connection is
established »Connection To Gateway:
Successfull«, »Internet Connection: Suc-
cessfull« messages and MAC address will
be displayed.
13 Press »eXIT« to end the setting.
40
enGlIsH
- ------------------------------------------------------------------------------------------
<
>
« or »
« and press
Connectingautomaticallybyenter-
ingthenetworkpassword
Use this method for establishing a connection
if your router does not support "WPS-PBC" or
WPS PIN entry.
1 Open the menu with »MenU«.
2 Activate the menu item »Settings« with
»oK«.
3 Select the menu item »Network Configura-
>
tion« with »
« or »
confirm.
– » Network configuration« menu is dis-
played.
Timer Applications
Change Connection Type
Network Configuration
Advanced
Connect
Test Connection
4 Select the line »Change Connection Type«
with »
« or »
« and press »oK« to con-
V
Λ
firm.
5 Select the option »Wireless« with »
>
»
« and press »oK« to confirm.
– W iFi warning screen will be displayed.
6
Activate WiFi with »
7 Select the line »Network Configuration«
with »
« or »
« and select the option
V
Λ
<
»AUTO« with »
« or »
8
Select the line »Select Access Point« with
»
« or »
« and press »oK« to confirm.
V
Λ
– » Select Access Point« menu is displayed
by scanning available wireless networks.
9 Select the network that you want to connect
with »
«, »
«, »
V
Λ
»oK« to confirm.
– W ireless connection password screen is
displayed.
note:
For device to discover the wireless modem
7
on the network, the network name should
support ASCII characters.
<
« and press »oK« to
TV Settings
Network Configuration
Wired
AUTO
Change Area
Back
<
« or
« (green).
>
«.
<
>
« or »
« and press
OK
Exit
Advertisement
Table of Contents
