Recording Programmes - Grundig Fine Arts 55 FLX 9491 SL Manual

Usb­ReCoRDInG
"Pausing"­time­shift­pro-
grammes
You can pause any program you are watching.
This is a useful function. For instance, if the phone
rings when you are watching a movie, you can
pause the movie and resume it after the call with-
out missing nothing.
The last scene that was frozen is displayed
and time shift is recorded into the external data
media.
In Time Shift mode, you can only record as much
as the free memory space on the external data
media.
You can record current broadcast for approxi-
mately 60 minutes.
note:
For undisturbed "Permanent Timeshift" use
7
an external USB hard disk.
1­
Press » « during the broadcast.
!
– T elevision picture is paused and delay
time is displayed.
2 To resume the broadcast, press »
– T he system continues recording the broad-
cast while you are watching it.
note:
Following functions can be used in time shift
7
mode.
– Fast rewind, press »
desired speed;
– Fast forward, press »
the desired speed;
– To pause press »
3 Press » « to exit the Time Shift function.
7
– T he message »Live Broadcast« appears.
– T he scenes in the "time shift memory" are
deleted.
56­ ENGLISH
­-------------------------------------------------------------------------------------------
«.
8
« several times for the
3
« several times for
4
«.
!
Recording­programmes
You can record the programmes. Programmes
are recorded onto the external data media and
the archive is managed via television.
A memory of 44 MB up to 110 MB is required
for a 1 minute record.
Other recordings in the archive can be watched
while a programme is being recorded.
It is possible to shift channels during recording
between unscrambled channels on the same
frequency (DVB-T) or on the same transponder
(DVB-S).
When switched to channels other than (Terres-
trial, Cable, Satellite and USB) during recording,
the recording process is stopped.
one-touch­programme­recording
1
Select the channel with »1...0« or »P+«,­
»P–« and press »
ing.
– R ecording information is displayed:
Recording symbol, channel name, pro-
gramme time and recording time.
– T his information will disappear shortly.
2 To end the recording, press »
3 Press » « (green) to accept;

or
to resume recording press »
notes:
When recording is complete, it will automati-
7
cally be stored on the external data media.
If you remove the external data media during
7
recording, then the recording is cancelled
automatically and no data is recorded onto
the external data media.
« to start the record-
«.
7
« (red).
