Grundig Fine Arts 55 FLX 9491 SL Manual
  1. Manuals
  2. Brands
  3. Grundig Manuals
  4. LCD TV
  5. Fine Arts 55 FLX 9491 SL
  6. Manual
Grundig Fine Arts 55 FLX 9491 SL Manual

Grundig Fine Arts 55 FLX 9491 SL Manual

Lcd tv with led backlight
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
LCD TV
with LED Backlight
Fine Arts 55 FLX 9491 SL
EN

Advertisement

Table of Contents
loading

Related Manuals for Grundig Fine Arts 55 FLX 9491 SL

Summary of Contents for Grundig Fine Arts 55 FLX 9491 SL

  • Page 1 LCD TV with LED Backlight Fine Arts 55 FLX 9491 SL...

  • Page 2: Table Of Contents

    Table­of­ConTenTs ­ - -------------------------------------------------------------------------------- ­ ­ 4­ seT-UP­anD­safeTY 35­ neTWoRK­seTUP Network connection ­ 6­ GeneRal­InfoRMaTIon Wired network Special features of your t elevision set Wireless network Receiving digital stations Change TV Name GRUNDIG SCR System Connecting the TV to a “hidden” network Important notes on environmental protec- 44­ sMaRT­Inter@ctive­TV­3.0­feaTURe tion 44 SMART Inter@ctive TV 3.0 internet ap- Notes on still images plications 8­ ConneCTIon/PRePaRaTIon Creating a Grundig Application Store Connecting the antenna and power cord account Inserting batteries in the remote control Logging in with Grundig Application Store account ­...
  • Page 3 Table­of­ConTenTs ­ - -------------------------------------------------------------------------------- 85­ oPeRaTIon­WITH­CoMMon­In- 67­ InTeRaCTIVe­PoRTal­(HbbTV) TeRfaCe What is HbbTV? Using HbbTV What is common interface? Additional functions for video indexes Inserting the CA module Access control for CA module and smart ­ 68­ ConVenIenCe­fUnCTIons cards TV Settings ­ 86­ sPeCIal­seTTInGs Language & Keyboard settings Accessibility settings Searching for all digital television chan- Accessories nels from a satellite automatically Advanced settings Searching for digital television channels Power save mode from a satellite manually Functions in the “About” menu LNB Settings Software update (OAD) Motor antenna setup (DiSEqC 1.2) Software update (Internet) Searching for television channels from the Software update (USB) cable provider automatically Resetting the television to its original state Searching for television channels from the Deleting channel history...
  • Page 4 seT-UP­anD­safeTY ­ - ---------------------------------------------------------------------------------- Please note the following information when set- If the mains plug of the television is grounded, ting up your television set. always make sure that it is connected to a grounded socket. This television set is designed to receive and display video and audio signals. Any other Plug the device into the mains socket only after use is strictly prohibited. you have connected the external devices and the antenna. Best viewing distance is 5 times the diagonal length of the screen. Make sure that the mains plug/socket of the television is comfortably accessible. External light falling on the screen impairs pic- ture quality. Do not connect any other equipment while the device is switched on. Switch off the other To assure sufficient ventilation make sure there equipment as well before connecting it.
  • Page 5 seT-UP­anD­safeTY ­ - ---------------------------------------------------------------------------------- To prevent the spread of fire, Things­to­do­for­energy­saving keep candles or other open Do not leave your television turned on if you flames away from this product are not watching it; switch it to standby. If you at all times. will not use your television for a long time, leave it in off mode by switching off from the Please use your television at a location as far mains (if any) or by unplugging. as possible from cellular phones, microwave ovens and similar devices operating with Prevent surrounding noises in the room high frequency waves. Otherwise your televi- where you watch your television. Keeping sion may malfunction because of such radio...

  • Page 6: General­information

    S, DVB-T and DVB-C standards as of August LED technology has been used in this televi- 2012, its compatibility with future DVB-S digi- sion to provide you with the best experience tal satellite broadcasts, DVB-T digital terrestrial in 3D feature. To join the 3D world, just put on broadcasts and DVB-C digital cable broad- the Grundig 3D glasses. casts is not guaranteed. Smart Inter@ctive TV 3.0 feature provides your This television can receive and process all TV with Internet applications when your TV is analogue and all unencrypted digital stations. connected to Internet. You can surf through This television set has an integrated digital and the web pages, visit popular video and photo analogue receiver. The digital receiver unit...

  • Page 7: Receiving Digital Stations

    GRUnDIG­sCR­system Higher brightness and/or contrast values will Y our TV supports SCR system (Single Chan- lead this impact to appear faster; therefore, nel Router). With SCR satellite system, several you are recommended to watch your TV in the users can individually receive all signals from lowest brightness and contrast levels.

  • Page 8: Connection/Preparation

    ConneCTIon/PRePaRaTIon ­----------------------------------------------------- Connecting­the­antenna­and­power­cord 1 To receive digital satellite channels (DVB-S), note: connect the satellite antenna cable to the When connecting an indoor antenna you antenna socket »saTellITe« on the televi- may have to try it out at different positions sion set; until you get the best reception. and / or 3 Plug the power cord into the wall socket. 2a To receive terrestrial digital broadcasters note: (DVB-T) connect the cable for the rooftop Only plug the device into the mains socket or indoor antenna (passive or active indoor after you have connected the external de- antenna with its own power supply) to the vices and the antenna.

  • Page 9: Inserting Batteries In The Remote Control

    ConneCTIon/PRePaRaTIon ­----------------------------------------------------- Inserting­batteries­in­the­remote­ environmental­note control This symbol on the bat- tery or on the packaging indicates that the battery provided with this product shall not be treated as household waste. On certain batteries this symbol might be used in combination with a chemical symbol. The chemical symbols for mercury (Hg) or lead (Pb) are added if the battery contains more than 0.0005% mercury or 0.004% lead.

  • Page 10: Connections On The Television Set

    oVeRVIeW ­-------------------------------------------------------------------------------------------------------------- Connections­on­the­television­set USB 3.0 audio A udio signal input for PC. HDMI5­4k2k H DMI socket, 4k2k audio/ video signal input (HDMI). PC-In V GA socket, video signal optic­out input for PC. A udio output sockets (optical) for PCM/Dolby CoMPonenT Digital signals. It is for digital ­­­l­­R A udio signal input (YUV sig- multichannel audio/video nal). amplifier or AV receiver con- ­­­Pr­Pb­Y V ideo signal input (YUV sig- nections. nal). Usb­3.0 U SB Harddisk socket for ex- aV1­/­s-VHs E uro/AV socket (CVBS sig- ternal data medium and PVR nal, RGB signal); video sig- function;...

  • Page 11: Control Buttons On The Tv

    oVeRVIeW ­-------------------------------------------------------------------------------------------------------------- Control­buttons­on­the­TV lan N etwork cable connection socket. on­•­off­ ­ P ower switch, switches the saTellITe S atellite antenna socket. television into standby mode and off. anT­In Antenna socket. HDMI4­(aRC) H DMI socket, audio/video Multi­function­switch­ signal input (HDMI). /I/sel« on the Using the multi function switch » HDMI3 television different settings can be made. H DMI socket, audio/video signal input (HDMI). There may be no menus visible on the screen. H eadphone connection (3.5 P ressing the switch, switches in the television mm jack); from standby mode. External audio output (with I n operation: Pressing the switch displays the headphone-RCA converter).

  • Page 12: Remote Control - Main Functions

    oVeRVIeW ­-------------------------------------------------------------------------------------------------------------- Remote­control­-­main­functions Turns on and off the television Switches on from standby set (stand-by). mode; selects channels directly. S witches between teletext Selects the channel list and TV modes. (»ALL«, »FAV 1« to »FAV 4«). Exits menu and applications. Opens MyApps menu. Displays information. ­ Z apping function; Opens the menu. switches the menus back one menu level. Opens the channel list. Opens the electronic TV guide Opens the Tools menu; opens/closes the control Opens the pre-selection menu menu when playing a file in for AV channels and the USB DLNA menu. input. Then make the selection with Adjusts the volume. < > » « or » « and press »oK« Turns volume on/off (mute). to accept.

  • Page 13: Remote Control - All Functions

    Apple iPhones, Windows mobile phones starts the forward picture search in and Android phones. Depending on the fea- the file browser. tures of your TV, you may control your TV by your phone after downloading the free S tarts recording (in digital TV op-  »GRUNDIG TV Remote« application from eration, recording only via external Apple App. Store, Windows Phone Store or data media). Google Play (Android Market). S tarts playback in the file browser; Starts playback in the DLNA menu. ENGLISH...

  • Page 14: Initial Set-Up

    seTTInGs ­------------------------------------------------------------------------------------------------------------------ Initial­set-up There are various options when using Wlan: The Television is fitted with an “installation assis- automatic­connection, tant”, which guides you step by step through the a ll data regarding connection settings (»IP Ad- basic settings. dress«, »Netmask«, »Gateway« and »DNS«) Using the screen dialogue, the user guide en- are obtained from modem automatically. ables supposedly complex settings and data D epending on the router, you can use the fol- entries to be presented simply and clearly for lowing options: everybody. – O ption “WPS-PBC” (Push Button Configura- Pages and dialogue items appear on the screen, tion);...

  • Page 15: Initial Set-Up - Overview

    seTTInGs ­------------------------------------------------------------------------------------------------------------------ Initial­set-up­–­overview select­language (page 16, step 3) select­country (page 16, step 5) select­mode (page 16, step 6) Network setup (page 16, step 8) Wired Wireless Wireless­WPs (page 16, step 8) (page 17, step 13) (chapter page 39) auto Manually auto Manually button (page 16, ( c h a p t e r (page 17, (Chapter (Chapter (Chapter step 8) page 37) step 13) page 41) page 39)) page 39)) setting­TV­channels (page 17, step 22) DVb-T DVb-C DVb-s (page 18, step 31) (page 18, step 26)

  • Page 16: Arrange Initial Set-Up

    – B asic Setup« menu appears when the note:­ dvice is switched on for the first time. I f you want to connect your television to the home network, – c ontinue at point 8 for an automatic LAN Hallo, my name is Grundig Please select your desired menu language Inter@ctive TV. In which connection, or language we would communicate? – c ontinue at point 13 for an automatic WLAN connection.
  • Page 17 seTTInGs ­------------------------------------------------------------------------------------------------------------------ note:­ 21 To switch to »Source Setup« menu press » « (blue).  C ontinue searching for TV channels with: – p oint 22 for DVB-S reception; note:­ – p oint 26 for DVB-C reception; C ontinue searching for TV channels with: – p oint 31 for DVB-T reception. – p oint 22 for DVB-S reception; – p oint 27 for DVB-C reception; Connecting­automatically­by­enter- – p oint 32 for DVB-T reception. ing­the­network­password searching­television­channels­with­ 13 Press » «, the line »Change Connection Type« is selected and press »oK« to con- satellite­signal­(DVb-s) firm. <...
  • Page 18 seTTInGs ­------------------------------------------------------------------------------------------------------------------ Tuning­cable­digital­television­chan- Tuning­terrestrial­digital­television­ nels­(DVb-C) channels­(DVb-T) < > < > 26 Select the option »Cable« with » « or » « 31 Select the option »Air« with » « or » « and and press »oK« to confirm. press »oK« to confirm. 27 Select the line »Scan Type« with » Important: « or » «. Λ The antenna power supply (5V ) may only < Select the option »Quick« or »Full« with » « be switched on if the antenna is an active >...

  • Page 19: Changing The Channel Editor For The Digital Channels

    seTTInGs ­------------------------------------------------------------------------------------------------------------------ opening­the­Programme­Table Changing­the­Channel­editor­for­ the­digital­channels 1 Open the menu with »MenU«. Channels found at the end of the search are 2 Activate the »Settings« menu with »oK«. stored in the »Channel Editor«. > 3 Select the option »Source Setup« with » « < You can delete channels which are not required or » « and press »oK« to confirm. from the programe table, you can change the 4 Select the line »Channel Editor« with » « order of channels within the programe table and or » « and press »oK« to confirm.
  • Page 20 seTTInGs ­------------------------------------------------------------------------------------------------------------------ searching­channels­by­name­in­the­ Moving­the­channels­in­the­chan- Channel­editor nel­organizer­to­different­channel­ positions While arranging the channels in the Channel Editor, you can search and select the channel 1 In the »Channel Editor« menu, select the name by the first three characters. channel(s) you want to move with » «, < > » «, » « or » «, and highlight the televi- Λ 1 In the »Channel Editor« menu, select the sion channel by pressing »oK«. search mode by pressing » « (red).  – Channel is marked with »✔«.
  • Page 21 seTTInGs ­------------------------------------------------------------------------------------------------------------------ sequencing­channels­in­the­Channel­ notes: editor You can delete channels from the favourites list. Press » « (yellow), select the favorites  You can sequence the channels in the Channel list the channel is in with » « or » « and Λ Editor according to different criteria such as TV, press »oK« to confirm. Select the channel(s) radio or scrambled / unscrambled. < you want to delete with » «, » «, » « or Λ 1 To sequence the channels according to dif- > » «, and highlight the channel by pressing ferent criteria in the »Channel Editor« menu, »oK«. press­» « (yellow).  Press » « (yellow) and select the line »Re-  2 Select the sequencing criteria you want with move from Fav.« with » «, » « and confirm Λ...
  • Page 22 seTTInGs ­------------------------------------------------------------------------------------------------------------------ enter­own­names­for­the­favourites­ Renaming­aV­channels lists­(max.­7­characters) You can rename AV channels according to the device you have connected. For example, for You can rename all favorites lists. a PC which you have connected to HDMI1 1 To recall favorites list menu when no menu is source of TV with HDMI cable, you can name opened on the screen, press »faV«. the source as PC. 2 Select the favorites list you want to rename 1 Open »Input Source« menu with » «. < > with » « or » « and press» « (blue)  2 Select the AV source you will rename with button.

  • Page 23: Picture Settings

    seTTInGs ­------------------------------------------------------------------------------------------------------------------ Picture­settings­ enhanced­picture­settings­ The “enhanced picture settings” are in principal 1 Open the menu with »MenU«. digital image improvements which, however, 2 Activate the menu item »Settings« with should be only used when necessary when pic- »oK«. ture quality and transmission is excellent. They 3 Activate the menu item »Picture Settings« may well improve the display with poor material, with »oK«. but may adversely affect the display where trans- – »Picture Settings« menu is displayed. mission and picture quality are excellent. »Backligh« – Manual setting for back light- < TV Settings Sound Settings > Picture Settings ing (only active if dynamic back lighting is switched to “OFF”). This setting also directly 3D Settings impacts power consumption.
  • Page 24 seTTInGs ­------------------------------------------------------------------------------------------------------------------ »Perfect Clear« – Improves the general im- Restore­default­settings age by means of a gentle blue hue (giving 1 In the menu »Picture Setting« select the item the appearance of greater sharpness) and »Restore default display settings« with » « improves the black level by setting this entire- or » « and press »oK« to confirm. Λ ly to black from specific shade of back. This 2 Press » « (green) to confirm the security  reduces the visible grey values in the dark query; areas of the picture. »Film mode« detects and processes feature films automatically for all channel sources.

  • Page 25: Sound Settings

    seTTInGs ­------------------------------------------------------------------------------------------------------------------ sound­settings­ night­Mode Night Mode prevents sound fluctuations and vol- 1 Open the menu with »MenU«. ume increases. 2 Activate the menu item »Settings« with 1 Select the line »Night Mode« with » « or »oK«. » «. 3 Select the menu item »Sound Settings« with Λ > < » « or » « and press »oK« to confirm. 2 Activate (»On«) or deactivate the night – »Sound Settings« menu is displayed. < > mode by pressing » « or » «. note: < Picture Settings Source Setup > Sound Settings Sound Settings »Night Mode« appears in menu if »SRS« has been selected in »Sound Mode«.
  • Page 26 seTTInGs ­------------------------------------------------------------------------------------------------------------------ automatic­volume The television channels broadcast at different volumes. The automatic volume limiting (AVL) function means the volume is kept the same when you switch between channels. 1 Select the line »Advanced« from the Sound Settings menu with » « or » « and press Λ »oK« to confirm. 2­ Select the line »AVL« with » « or » « and Λ < > then select »On« with » « or » «.

  • Page 27: Basic Functions

    TeleVIsIon­oPeRaTIon ­--------------------------------------------------------------------- basic­functions selecting­stations­from­lists You can select stations from various lists, (e.g. switching­on­and­off ALL, FAV1-FAV4). 1 Switch the television to standby with the 1 Press »faV« to recall the favorite list menu. power switch »on­•­off«. – » Select Favorite« menu is displayed. 2 Press » «, »1…0« or »P+« or »P-« to switch < > 2 Select the channel list with » « or » « and on the television from standby mode. open it with »oK« 3 Press » « to switch the television to standby. < > 3 Select the channel with » « or »...

  • Page 28: Zoom Function

    TeleVIsIon­oPeRaTIon ­--------------------------------------------------------------------- audio­settings Zoom­function 1 Open the Tools menu with »Tools«. With this function, you can enlarge the picture on the television. 2 Select the line »Sound Presetting« with » « or » «. Λ 1 Open the Tools menu with »Tools«. < 3­ Select the audio setting by pressing » « or 2 Select the line »Zoom« with » « or » «. Λ > » «. < > 3­ Select zoom setting with » « or » « and – Y ou can change the »User« audio setting; confirm with »oK«. see “Equalizer” on page 25. – Image is enlarged as center-focused. 4 Press »eXIT« to end the settings.

  • Page 29: Zap Function

    TeleVIsIon­oPeRaTIon ­--------------------------------------------------------------------- Zap­function electronic­TV­guide­ (RoviGuideTM) This function allows you to save the television channel which you are currently watching and Electronic TV guide has two operation modes: switch to other channels (zapping). online and offline. 1 Select the channel you want to save in the In the offline mode, only the broadcast informa- zap memory with »1…0« or »P+«, »P-« (for tion is received via broadcast. example, channel 1, BBC 1) and save with A lot of content can be received via the Inter- »baCK «. < net connection in the online mode such as, pro- 2­ Change channels with »1…0« or » «­ Λ...
  • Page 30 TeleVIsIon­oPeRaTIon ­--------------------------------------------------------------------- The­electronic­TV­guide­in­online­ 4 Switch to the information about the current programme using »oK«. mode notes: »Search« and »Suggestions« options comes in the electronic programme guide in the online T o call up further information about the pro- mode as different from the offline mode. A lot gramme press » « or » « repeatedly. Λ of content can be received via the Internet with T o display a small image of the programme these options such as, programme information, >...

  • Page 31: Changing The Picture Format

    TeleVIsIon­oPeRaTIon ­--------------------------------------------------------------------- Changing­the­picture­format »Panorama«­format­ This setting is suited to films with a large width/ The television automatically switches to the 16:9 height ratio. format if this format is detected via the Euro-AV During programmes in 4:3 format the picture is socket. stretched horizontally if the »Panorama« func- 1 Open the Tools menu with »Tools«. tion is selected. The picture geometry is stretched 2 Select the line »Picture Format« with » « or horizontally. » «. Λ »overscan­off«­format < > 3 Select the picture format with » « or » « When this mode is selected, high defined pic- and press »OK« to confirm.

  • Page 32: Important Information About 3D Function

    To join 3D world, you just need to put on the N ever use the 3D function for longer than Grundig 3D glasses. 3 hours without a break. note: I t is essential that you supervise children GRUNDIG 3D Glasses supplied with the watching a 3D programme to prevent dam- product are inactive 3D glasses. Inactive 3D age to their health. Children under 6 years glasses are also sold separately. Please con- should not watch 3D content because their...

  • Page 33: 3D­settings

    3D­fUnCTIon ­---------------------------------------------------------------------------------------------------- 1 Open »Select Source« menu with » 3D­settings «. < 2 Select the 3D playback AV source with » « 1 Open the menu with »MenU«. > or » « and press »oK« to confirm. 2 Activate the menu item »Settings« with < > 3 Open 3D menu with »3D«, use » « or » « »oK«. to select »Side by Side«, »Top Bottom« or 3 Activate the menu item »Picture Settings« »2D → 3D« option according to the content with »oK«. to be played and press »oK« to confirm. – »Picture Settings« menu is displayed. – » 2D → 3D«: Changes 2D picture to 3D. 4 Select the line »3D Settings« with » « and – » Side by Side«: Displays a picture next to press »oK« to confirm.
  • Page 34 3D­fUnCTIon ­---------------------------------------------------------------------------------------------------- adjusting­2D­→­3D­effects formats­supported­with­HDMI­1.4 When you change 2D broadcasting to 3D, you With HDMI 1.4, your TV can recognize and can adjust the most suitable effect depending on play 3D contents. To exit 3D mode, turn off the your personal preferences. function by setting it to »Off« with »3D«. Formats supported in 3D mode with HDMI 1.4 are pro- 1 Select the line »Effect mode« with » « or vided in the following table. < > » « and set it to »On« with » « or » «. Λ – » 3D Perspective« and »Depth« options film­content Frame Packing 1080p @ are activated. 23.98/24Hz 2 Select the line »3D Perspective« with » « <...

  • Page 35: Network Connection

    ­ - ------------------------------------------------------------------------------------------ To use the functions “GRUNDIG AppLICA- ­ W ired­network TION store” and “Operation with Digital Media ­ W ired­network­connection Server”, you must connect the television to your home network with internet access and log on. 1 Connect the output of external modem to »lan« socket with Cat 5 cable. Grundig Application Store is a depot where you can find various applications that you may use on your Grundig TV. You can download many applications from Grundig Application Store. These applications include video, picture, music, social networking applications, news and sports applications, weather forecast applications and some specific applications. Your TV supports remote control feature for Apple iPhones, Android and Windows based phones. Depending on the features of your...
  • Page 36 neTWoRK­seTUP ­ - ------------------------------------------------------------------------------------------ Wired­network­settings 6 Select the line »Network Configuration« < > with » « or » « and use » « or » « to Λ There are two ways of making the wired network select »AUTO«. settings. 7 With » « (red) select »Connect« to establish  a Automatic connection, modem connection. A ll data regarding connection settings (»IP Ad- – » Connecting ... Please wait« message dress«, »Netmask«, »Gateway« and »DNS«) will be displayed, and if the connection are obtained from modem automatically. is established »Connection To Gateway: b Manual connection, Success« message will be displayed. a ll data regarding connection settings (»IP Ad- 8 Press » « (green) to check the performed ...
  • Page 37 neTWoRK­seTUP ­ - ------------------------------------------------------------------------------------------ ­ M anual­connection 12 With » « (red) select »Connect« option to  establish modem connection. Certain networks require Static IP address. If – » Connecting... Please wait« message will your network requires a Static IP address, you be displayed, and if the connection is must enter the »IP Address«, »Netmask«, »Gate- successful, Connection to Gateway: Suc- way« and »DNS« values manually. You can cessful« message will be displayed. get »IP Adress«, »Netmask«, »Gateway« and »DNS« values (IPS) from your Internet Service 13 Press »...

  • Page 38: ­ W Ireless­network

    neTWoRK­seTUP ­ - ------------------------------------------------------------------------------------------ ­ W ireless­network Placing the modem or wireless network shar- er on an elevated location will increase the Wireless­network­connection wireless connection reception strength. There are different ways of making the wire- Wireless connection reception strength may less network settings. »Wireless« and »Wireless vary depending on the type of the modem WPS« (WiFi Protected Setup). and the distance between the modem and television. Wireless­network­settings You have several ways to connect your TV to your home network.
  • Page 39 neTWoRK­seTUP ­ - ------------------------------------------------------------------------------------------ Technical­requirements­ 10 To continue after pressing the WPS button on the access point, press » « (green).  Most of the home networks are Dynamic. If you – T he “Connection to Gateway: Success” have a dynamic network, you must use a DSL message will be displayed. modem that supports DHCP. Modems and IP sharers that support DHCP obtain the »IP Ad- 11 Press » « (green) to make sure that the ...
  • Page 40 neTWoRK­seTUP ­ - ------------------------------------------------------------------------------------------ 8 Select the line »Select Access Point« with Connecting­automatically­by­enter- » « or » « and press »oK« to confirm. Λ ing­the­network­password – P resent WPS-supported wireless networks Use this method for establishing a connection are scanned to display in the »Select Ac- if your router does not support “WPS-PBC” or cess Point« menu. WPS PIN entry. 9 Select the network that you want to connect 1 Open the menu with »MenU«. < > with » «, »...
  • Page 41 neTWoRK­seTUP ­ - ------------------------------------------------------------------------------------------ 10 Select the required character with » ­ M anual­connection «, < > » «, » « or » « and move to the next Λ Certain networks require Static IP address. If character with »oK«. your network requires a Static IP address, you – U sing »shift« ➡ »oK«, you can switch must enter the »IP Address«, »Netmask«, »Gate- between uppercase letters / numbers and way« and »DNS« values manually. You can lowercase letters / special characters. get »IP Address«, »Netmask«, »Gateway« and – S elect »...

  • Page 42: Change Tv Name

    neTWoRK­seTUP ­ - ------------------------------------------------------------------------------------------ Change­TV­name 12 Select the line »Gateway« with » «. Enter Gateway address with »1…0«. To make it possible to identify your TV in the net- 13 Select the line »Select Access Point« with work, the name “Inter@ctive TV” is assigned at » « or » « and press »oK« to confirm. the factory. You can change the name. Λ – » Select Access Point« menu is displayed 1 Open the menu with »MenU«. by scanning available wireless networks. 2 Activate the menu item »Settings« with 14 Select the network that you want to connect »oK«. < > with » «, » «, » « or » « and confirm Λ 3 Select the menu item »TV Settings« with with »oK«. »...

  • Page 43: Connecting The Tv To A "Hidden" Network

    neTWoRK­seTUP ­ - ------------------------------------------------------------------------------------------ Connecting­the­TV­to­a­“hidden”­ note: network If the »WPA« option is selected, the security protocol (AES or TKIP) must be selected on Even if the SSID (Service Set Identifier) of the the line »Encryption«. This depends on the router is not visible, you can connect your TV to settings on the router. this network. 10 Confirm the setting with » « (red).  1 Open the menu with »MenU«. – T he network is now in the »Select Access 2 Activate the menu item »Settings« with Point« menu. »oK«.

  • Page 44: Smart Inter@Ctive Tv 3.0 Internet Ap- Plications

    If your wired or wireless other than the ones in Grundig Smart Apps. adapter is connected but you cannot receive Grundig is not responsible for the content IP or internet is not connected, the Inter@ and the quality of content offered by the ctive applications cannot be started. In this content providers. case, check Network connection settings.

  • Page 45: Creating A Grundig Application Store Account

    ­-------------------------------- navigation­and­entering­text­­ Creating­a­Grundig­application­ during­registration­ store­account 1 Press »@« to open »MyApps« menu. You must register to access all applications in – G rundig Smart Apps registry screen is Grundig Application Store. displayed. 1 Press »@« to open »MyApps« menu. – G rundig Smart App registry screen is displayed. 2 Press »oK« to start registration. Welcome to 3 Enter your »Name« and »Surname«: Select the letters for the information with You need to register in order to use smart <...

  • Page 46: Logging In With Grundig Application Store Account

    8 To complete registration process press loaded will be deleted, and when you access » « (blue).  »Inter@ctive Applications« menu, the registration 9 Press »oK« to read and accept conditions screen will be displayed again. of use. You can log-in again with the e-mail and pass- – » Inter@ctive Applications« menu will be word you have provided during Grundig Ap- displayed, and standard applications will plication Store registration without the need for be downloaded and installed to your TV. re-registration. 1 Press »@« to open »MyApps« menu. – G rundig Smart App registry screen is displayed. 2 To login press » « (blue). ...

  • Page 47: Grundig Application Store

    IP even 4 To start application press »oK«; if you’re connected to a network or you do not have internet access. In this case, check Network connection settings. See. page 35 to continue installing application press or 38. »baCK «. < Grundig­application­store Grundig Application Store is an online depot where you can download many applications that you may use on your TV. Some applications in the »MyApps« menu are loaded in your device as factory settings. You can download a wide array or applications from Grundig Application Store. 1 Press »@« to open »MyApps« menu. 2 To enter »Grundig Application Store«, select the push button »Online Store« with <...
  • Page 48 sMaRT­InTeR@CTIVe­TV­3.0­feaTURe ­-------------------------------- Uninstalling­internet­applications adding­Internet­applications­to­ favorites 1 Press » « (red) button in »My apps« menu  < > and select categories with » « or » «. You can add frequently used Internet applica- tions to favorites and collect these under »Favor- 2 Select the application you want to uninstall ites« heading under categories. < > with » «, » «, » « or » «. Λ 1 Press » « (red) button in »My apps« menu  3 Actiade the tools menu by pressing » « ...
  • Page 49 sMaRT­InTeR@CTIVe­TV­3.0­feaTURe ­-------------------------------- smart­Inter@ctive­TV­3.0­browser­main­menu 1 Applications. Online Store My apps 2 Push button to the Application store. 3 Search bar. 4 Categories menu. 5 Tools menu. 6 Exit. Categories Tools Exit < > navigating­in­the­main­menu 6 » «, » «, » «, » « allows sliding of the Λ navigation keys in the applications and 1 Press » « (red) button in »My apps« menu  virtual keyboard. < >...
  • Page 50 Web­bRoWseR ­ - ------------------------------------------------------------------------------------------------ Web­browser­menu 10 11 12 13 http://www.grundig.de grundig. Process Menu Zoom Out Zoom In Page Up Page Down Navigation Tool Bar 1 Menu controls. Web­browser Web browser allows you to navigate in the In- 2 Active tab. ternet. 3 Previous page. 1 Open the menu with »MenU«. 4 Next page. 2 Select the menu item »Web Browser« with 5 Refresh.

  • Page 51: Playing The Video, Music And Image Files With Home Network Connection

    MUlTIMeDIa­seRVeR­MoDe ­----------------------------------------------------------- Playing­the­video,­music­and­ selecting­the­digital­media­ image­files­with­home­network­ server connection 1 Open the menu with »MenU«. > With DLNA menu of your television, you can 2 Select the menu item »DLNA« with » « or < easily access Video, music and photo files on » « and press »oK« to confirm. server; and thanks to DMR feature, you can au- – » Media Player« menu is displayed. tomatically start and stop media playing on de- note: vices with DMC feature. If no DMS device appears, check the net- notes: work connection. See page 35 or 38.

  • Page 52: Playback

    MUlTIMeDIa­seRVeR­MoDe ­----------------------------------------------------------- Audio files played through DMS device sup- Playback port following formats that have obtained 1 Select the content folder on DMS device DLNA certificate: »AAC_ADTS_320«, < > with » «, » «, » « or » « and press Λ »LPCM«, »MP3«, »WMABASE« and »oK«. »WMAFULL«. – All titles are displayed. to confirm. Image files played through DMS device sup- < 2 Select the desired title with » «, » «, » « Λ port following formats that have obtained >...

  • Page 53: Information On Recording And Playing Television Programmes

    R ecording and reproducing programmes, Depending on the broadcasting station, you may this can only be done with digital television experience various restrictions on some functions stations (DVB-S, DVB-T and DVB-C). from some television stations. T he digital television stations (DVB-S, DVB- GRUnDIG­has­no­influence­on­these­ T and DVB-C) you are able to record and restrictions. playback also depend on the broadcasting R ecording a programme on the external station. data medium can be disabled by the broad- R ecording and reproducing programmes, as caster.

  • Page 54: Connecting External Data Media

    Usb­ReCoRDInG ­------------------------------------------------------------------------------------------- Connecting­external­data­media notes: Both sockets »Usb« of the television sup- notes: ports 500 mA current according to the USB It is advised to put the television on stand-by standard. Devices such as external hard disk mode before connecting the Skype camera. and etc. that consume more power can only Before disconnecting the external data me- be connected to the »Usb­3.0« USB inter- dium, the television must first be switched to face of the television. standby, otherwise files can be damaged. If you are using a power cable for the exter- There are three USB inputs on the television, nal hard disk that you have connected to the namely »Usb«, »Usb« and »Usb­3.0«. »Usb­ 3.0« USB interface, then the power »Usb­3.0« input is intended for USB devices cable of the external hard disk must also be that require additional power (e.g. external unplugged when the TV is turned off.
  • Page 55 Usb­ReCoRDInG ­------------------------------------------------------------------------------------------- Disconnecting­external­data­media 4 Switch back with »baCK « or press < »eXIT« to end the setting. 1 In the »Disk Management« menu select the line »Safely Remove Disk« with » « or formatting­the­partition » « and press »oK« to confirm. Λ 1 In the »Disk Management« menu select the note: line »Format Partition« with » « or » « Λ Disk can be safely removed from the socket and press »oK« to confirm. now. 2 To confirm deletion process, press » «  selecting­external­data­media (green); If there are more than one external data media connected to the television, then select one of to cancel deletion process, press »...

  • Page 56: Recording Programmes

    Usb­ReCoRDInG ­------------------------------------------------------------------------------------------- ″Pausing”­time­shift­pro- Recording­programmes grammes You can record the programmes. Programmes are recorded onto the external data media and You can pause any program you are watching. the archive is managed via television. This is a useful function. For instance, if the phone rings when you are watching a movie, you can A memory of 44 MB up to 110 MB is required pause the movie and resume it after the call with- for a 1 minute record. out missing nothing. Other recordings in the archive can be watched The last scene that was frozen is displayed while a programme is being recorded. and time shift is recorded into the external data It is possible to shift channels during recording media. between unscrambled channels on the same In Time Shift mode, you can only record as much frequency (DVB-T) or on the same transponder as the free memory space on the external data (DVB-S).

  • Page 57: Programme Setting For Recording

    Usb­ReCoRDInG ­------------------------------------------------------------------------------------------- Recording­a­programme­from­the­ note: channel­list If the data for the recording is to be changed, open menu with »MenU«. Select the menu 1 Press »oK« to open the channel list. > item »Schedule List« with » « and confirm < > 2 Select a channel with » « or » « and press with »oK«. Press » « (green), change the  »oK« to confirm. data and and save it with » « (blue).  3 Press »eXIT« to exit from the channel list. notes: 4 Press » « (red) to start recording. A warning is displayed before the timer re- cording starts and counts down for 10 sec- – R ecording information is displayed: onds to allow you to switch to the channel.
  • Page 58 Usb­ReCoRDInG ­------------------------------------------------------------------------------------------- ...­by­entering­the­information­ editing­the­timer manually You can edit programmed timers. 25 TV programmes can be preset for the timer 1 Open the menu with »MenU«. recording or as a reminder. 2 Select the menu item »Schedule List« with 1 Press »GUIDe« to open the electronic > < » « or » « and press »oK« to confirm. programme guide. – » Schedule List« menu will be displayed. 2 Press » « (yellow) button.  3 Select the title of the programme to be changed with » « or » « and press » « 3 Select the line »Manual Record« with » Λ «  (green) to edit the title. or » « and press »oK« to confirm.

  • Page 59: Playback

    Usb­ReCoRDInG ­------------------------------------------------------------------------------------------- Playback Playback­during­a­recording You can either watch the current programme Either started manually or with the timer function, that is being recorded or a previously recorded the recorded programmes are all stored in the programme while recording takes place. external data media. You can display an archive on an external data media from »Media Player« Select the channel with »1…0« or »P+«,­ menu. »P–« and press » « to start the record- ing. selecting­a­broadcast­from­the­ 2 To display PVR content press » « (red) but-  recorded­files­list ton. 1 Open the menu with »MenU«. 3­ Select the programme you want to watch > 2 Select the menu item »PRnP« with » « or with » « or » « and start playback with Λ...

  • Page 60: File Formats

    Usb­oPeRaTIon ­-------------------------------------------------------------------------------------------- file­formats Image­data Your television can display picture data in JPEG, Your television can be operated via the USB PNG and BMP formats. input with the following file formats: JPEG stands for Joint Picture Experts Group. This Video­data process is intended to compress picture files. PNG and BMP standards are intended to com- Video compression / decompression (codec) is press picture data without loss. intended for decreasing the storage area without Picture files can be saved in a data storage me- sacrificing the picture quality. dium together with other file types. Your HD Digital Receiver allows you to play Such files can be organized as folders and sub- compressed video data with DIVX, XVID, folders.

  • Page 61: Connecting External Data Media

    Usb­oPeRaTIon ­-------------------------------------------------------------------------------------------- Connecting­external­data­media It is advised to put the television on stand-by mode before connecting the external data me- dium. Connect the device and then switch the television on again. Before disconnecting the data medium, the tele- vision must first be switched to standby, other- wise files can be damaged. notes: Both sockets »Usb« at the side of the televi- sion supports 500 mA current according to the USB standard. Devices such as external hard disk and etc. that consume more power can only be connected to the »Usb­...

  • Page 62: The File Browser

    Usb­oPeRaTIon ­-------------------------------------------------------------------------------------------- The­file­browser­ settings­in­the­Usb­setup­menu The file browser displays the video, audio and selecting­the­menu picture data that the external data medium pro- 1 Open the menu with »MenU«. vides. 2 Select the menu item »Media Player« with If a data medium contains different file formats, > < » « or » « and press »oK« to confirm. you can deactivate data (Video file, Audio file, < Picture file) you do not need for the playback 3 Select the external data medium with » « or > using a filter function. » « and press »oK« to confirm. 4 Select the »Media Options« with » «  The­main­menu­of­the­file­browser (green).
  • Page 63 Usb­oPeRaTIon ­-------------------------------------------------------------------------------------------- selecting­the­display­duration­of­ DivX­Plus®­HD­VoD the­slide­show You must have your device registered in order to play the protected video that you will buy from 1­ Select the line »Slide Show Interval« with DivX®. » « or » «. Λ < 1 In the Media Player menu press » « 2­ Select the time (3, 5, 10 seconds) with » «  > (blue). or » «. – Registration Code appears. 3 Press »eXIT« to end the setting. 2 Visit “http://vod.divx.com” and register the subtitle­settings device with the registration code. If the film has subtitles, you can turn on and off 3 Press »eXIT« to end the setting. this subtitle, change its size, colour or eliminate DivX Certified® to play DivX®and synchronisation shift with the subtitle. DivX Plus® HD (H.264/MKV) up to 1080p HD, including high qual- 1 From »Media Options« menu use »...

  • Page 64: Playback Basic Functions

    Usb­oPeRaTIon ­-------------------------------------------------------------------------------------------- Playback­basic­functions­ notes: U se » « to select »Up Folder«, when you Λ 1 Open the menu with »MenU«. would like to return to the last folder. 2 Select the menu item »Media Player« with It is possible that some files that are sup- > < » « or » « and press »oK« to confirm. ported in USB mode do not operate due to – » Media Player« menu is displayed. some problems that may arise depending <...

  • Page 65: Additional Playback Functions

    Usb­oPeRaTIon ­-------------------------------------------------------------------------------------------- additional­playback­functions Move­to­desired­time (only video files) Depending on the file formats used, the follow- ing additional functions are possible. 1 Press »oK« during playback. 2 Enter the time that you want to move to with selecting­partition­in­DivX­Plus®­HD­ »1...0« and confirm with » « (green).  files (only supported video files) searching­forward 1 During playback, select the next chapter (only video and audio files) > with » «. You can select different speeds (2-fold, 4-fold, 2 During playback, select the previous chap- 8-fold, 16-fold and 32-fold forwards and back- < ter with » «. wards). 1 During playback you can select playback selecting­titles­on­DivX­Plus®­HD­ speed by pressing » « or » «. files 2 To resume playback press » «.

  • Page 66: Top Text Or Flof Text Mode

    TeleTeXT­MoDe ­------------------------------------------------------------------------------------------------ 2 Press » note: « to switch to the teletext page. I f you only want to use this “normal” video Increasing­character­size text, disable the digital video text, see page If you have difficulty reading the text on the screen, you can double the character size. ToP­text­or­flof­text­mode 1 To enlarge the character size of a teletext 1 Press »TXT« to switch to the Teletext mode. page, press » « repeatedly. 2 You can select teletext pages directly with Page­stop »1...0« or step by step with » « or » «. Λ A multiple page may contain several sub-pages, To return to page 100, press »?«. which are automatically scrolled by the transmit- ting station. note: At the bottom of the screen, you will see an 1 Stop the sub-pages with »...

  • Page 67: What Is Hbbtv

    InTeRaCTIVe­PoRTal­(HbbTV) ­ - --------------------------------------------------- What­is­HbbTV? This service provided by ARD includes “Das Er- HbbTV provides next generation interactive tele- ste1Mediathek” along with teletext restructured text broadcast with its modern structure, content graphically with high definition images. ZDF and high definition (HD) image and videos. service includes “ZDF mediathek” and other pro- To receive HbbTV broadcast, your television gramme information (as of July 2012). must be connected to the Internet. This feature is only available in countries where the service is provided. Das Erste Heute Do. 15:08 03.03 Di 04.03 Gestern Morgen Sa 08.03 So 09 Heute Heute 14:00 - 14:10 Heute 14:10 - 15:00...

  • Page 68: Tv Settings

    ­ C onVenIenCe­fUnCTIons ­ - ----------------------------------------------------------- TV­settings 3 Select the audio language with » «, » «, Λ < > » « or » « and press » « (red) to set it as  1 Open menu with »MenU« button. the primary audio language or » « (green)  2 Activate the menu item »Settings« with to set it as the secondary audio language. »oK«. – P rimary and secondary languages ap- > 3 Select the menu item »TV Settings« with » « pear on the upper left corner of the menu. < or » « and press »oK« to confirm. 4 Press »baCK « to go back one menu <...

  • Page 69: Accessibility Settings

    ConVenIenCe­fUnCTIons ­ - ----------------------------------------------------------- accessibility­settings accessories 1 Open menu with »MenU« button. You can connect various accessories to your television to use with video talk, volume control, 2 Activate the menu item »Settings« with motion control or a keyboard and mouse to use »oK«. in your web browser. Display the status of the > 3 Select the menu item »TV Settings« with » « connected accessory from this menu to perform < or » « and press »oK« to confirm. various adjustments. 4 Select the line »Accessibility Settings« with 1 Open menu with »MenU« button. » « or » « and press »oK« to confirm. Λ note: 2 Activate the menu item »Settings« with »oK«.

  • Page 70: Advanced Settings

    ConVenIenCe­fUnCTIons ­ - ----------------------------------------------------------- advanced­settings store­logo­view­ This function is intended for feature introduction 1 Open menu with »MenU« button. at stores. When »On« is selected, feature logos 2 Activate the menu item »Settings« with are displayed. »oK«. > 1 From the »Advanced Settings« menu use 3 Select the menu item »TV Settings« with » « < » « or » « to select the line »Shop Logo or » « and press »oK« to confirm. Λ Display«. 4 Select the line »Advanced Settings« with » « or » « and press »oK« to confirm. Λ < > 2 Select »Yes« with » « or » «. note: note: Additional operations are explained in the...

  • Page 71: Functions In The "About" Menu

    ConVenIenCe­fUnCTIons ­ - ----------------------------------------------------------- functions­in­the­“about”­menu software­update­(Internet) 1 Open menu with »MenU« button. (only for digital television channels) 2 Activate the menu item »Settings« with 1 From the »About« menu use » « or » « Λ »oK«. to select the line »Software Updates« and > 3 Select the menu item »TV Settings« with » « press »oK« to confirm. < or » « and press »oK« to confirm. < > 2 S elect the option »Internet« with » « or » « 4 Select the line »About« with » « or » « Λ and press »oK« to confirm. and press »oK« to confirm.

  • Page 72: Resetting The Television To Its Original State

    ConVenIenCe­fUnCTIons ­ - ----------------------------------------------------------- Resetting­the­television­to­its­ Timer­settings original­state 1 Open menu with »MenU« button. This function enables you to delete the station 2 Activate the menu item »Settings« with lists and all custom settings. »oK«. > 3 Select the menu item »Timer Apps« with » « 1 From the »About« menu use » « or » « Λ < or » « and press »oK« to confirm. to select the line »Restore Factory Defaults« – » Timer Applications« menu is displayed. and press »oK« to confirm. – Warning screen will be displayed. Parental Guidance Network Configuration Timer Applications note:...

  • Page 73: Date And Time Settings

    ConVenIenCe­fUnCTIons ­ - ----------------------------------------------------------- Date­and­time­settings 2 Select the line »Mode« with » « or » « Λ < > and use » « or » « to select when the 1 Open menu with »MenU« button. television should switch on. 2 Activate the menu item »Settings« with 3 Select the line »Input Source« with » « or »oK«. < > » « and use » « or » « to select the input Λ > 3 Select the menu item »Timer Apps« with » « source. < or » « and press »oK« to confirm. 4 Select the line »Service Type« with » « or 4 Select the line »Advanced« with »...

  • Page 74: Parental Settings

    ConVenIenCe­fUnCTIons ­ - ----------------------------------------------------------- 2 Enter the PIN code »1234« with »1...0« in 6 Press »baCK « to go back one menu < the password prompt. level or press »eXIT« to end the setting. < > 3­ Select the access level with » « or » «. note: If the option »Auto« is selected in the line 4 Press »baCK « to go back one menu < »Time Adjustment«, the television set auto- level or press »eXIT« to end the setting. matically adapts the time to the time signal note: from the respective broadcaster. However, When the TV is in review buffer mode, the...
  • Page 75 ConVenIenCe­fUnCTIons ­ - ----------------------------------------------------------- 3­ Activate (On) or deactivate (Off) the panel note: < > lock with » « or » «. To remove the lock, select the channel again < > with » «, » «, » « or » «, activade the Λ 4 Press »baCK « to go back one menu < »Tools« menu with » « (yellow), select the  level or press »eXIT« to end the setting. line »Unlock Channel« with » « or »...

  • Page 76: Digi Link

    UsInG­eXTeRnal­DeVICes ­ - -------------------------------------------------------------- DIGI­lInK searching­and­selecting­the­active­ external­device Your television is equipped with DIGI LINK feature. This feature You can connect up to 11 devices that support utilizes CEC (Consumer Elec- DIGILINK to this television. tronics Control) protocol. CEC 1 Open the Tools menu with »Tools«. allows you to make an HDMI 2 Select the line »Digilink« with » « or connection between your TV and DVD player, » «and press »oK« to confirm. Λ STB or video recorder and control such equip- – C onnected devices are searched and the ments with the remote control of the television. ones that are found are displayed on the This feature must also be supported by the de- »Device List« menu.
  • Page 77 – » Source Setup« menu is displayed. – » Source Setup« menu is displayed. 5 Select the line »Put device into standby« Sound Settings Parental Guidance Source Setup with » « or » « and press »oK« to con- Λ firm. Device GRUNDIG – T he connected external device is switched Remote Behavior None off. Put device into standby Change Area Back 5 Select the line »Remote Behavior« with » « or » «.

  • Page 78: High Definition - Hd Ready

    UsInG­eXTeRnal­DeVICes ­ - -------------------------------------------------------------- High­definition­–­HD­ready Connection­options Your television can Which television socket(s) you connect your playback high-defini- external devices to depends on the sockets tion television signals the external device is equipped with and the (HDTV). signals which are available. You can connect the Note that with many external devices the res- input sources (HDTV olution of the video signal must be adapted set-top box or High to the input sockets on the television (check Definition DVD player) to the »HDMI« socket the external device’s instruction manual).

  • Page 79: Connecting An External Device

    UsInG­eXTeRnal­DeVICes ­ - -------------------------------------------------------------- Connecting­an­external­device Using­the­euro/aV­socket Suitable devices: Digital satellite receiver, With­a­digital­audio/video­signal DVD player/recorder, set-top box, game con- Suitable devices: Digital satellite receiver, sole, video recorder, decoder. game console, BluRay player, DVD player/ Video signal: CVBS/RGB. recorder, set-top box, notebook, PC. Audio signal: stereo, analog. Video signal: digital image; definition: stan- Channel position »SCART«. dard 576p; HDTV 720p, 1080i, 1080p. 1 Connect the »aV1/s-VHs« input on the Audio signal: digital sound (stereo, multichan- television to the corresponding socket on nel compression, uncompressed).

  • Page 80: Using A Dvd Recorder, Dvd Player, Video Recorder Or Set-Top Box

    UsInG­eXTeRnal­DeVICes ­ - -------------------------------------------------------------- With­s-Video­signal Headphones Suitable devices: DVD player/recorder, video Connecting­headphones recorder, camera recorder, notebook, PCs. 1 Plug the headphone jack (3.5 mm ø jack Video signal: Y/C. plug) into the headphone socket of the Audio signal: stereo, analog. television. Channel position »S-VIDEO«. 1­ Connect the »aV1/s-VHs« socket on the selecting­the­sound­settings­for­the­ television to the corresponding socket on headphones the external device using EURO/AV cable 1 Open the menu with »MenU«. (video and audio signal). 2 Activate the menu item »Settings« with Using­a­DVD­recorder,­DVD­ »oK«. player,­video­recorder­or­set-top­ 3 Select the menu item »Sound Settings« with > < » « or » « and press »oK« to confirm. – » Sound Settings« menu is displayed. 1 Switch on the video recorder, DVD player or 4 Select the line »Advanced« with »...
  • Page 81 UsInG­eXTeRnal­DeVICes ­ - -------------------------------------------------------------- apply­the­device­with­HDMI­aRC­ notes: function­and­activate­HDMI­aRC The internal speakers of the television are switching off automaticaly. 1 Switch on the the multi-channel amplifier or the AV receiver. If a Blu-ray Player is con- The volume of the AV receiver you can adjust nected on the AV receiver, the player must with the remote control of the television. be switched on, too. For switching off the HDMI ARC function se- < > 2 Open the tools menu with »Tools«. lect »Off« with » « or » «. 3 Select the line »Digilink« with » « or » « Λ The ARC function will be deactivated while and press »oK« to confirm. switching off the television and the internal – A udio device connected to the »HDMI4 speakers are active again.

  • Page 82: What Is Mhl

    Cable­sCReen­sHaRe­(MHl) ­--------------------------------------------------------- What­is­MHl? Your television supports MHL connection (Mo- bile High Definition Connection) thanks to a MHL cable or MHL adapter. MHL connection allows you to share your mo- bile device screen with television by connect- ing your mobile device to television by a MHL cable. MHL can only be used from »HDMI1 (MHL)« socket and only with a mobile device that sup- ports MHL feature. Connecting­a­mobile­device 1 Connect the »HDMI1 (MHL)« socket on your television with the corresponding socket of the mobile device by using an MHL cable or HDMI adapter. selecting­the­channel­position­ for­a­mobile­device < > 1 Press » « and use » « or » « to select input signal »HDMI1«, then confirm with »oK«. – S creen image of your mobile device will be displayed on the television. note: To find out if your mobile device supports MHL connection or not, please visit the Web- site of the manufacturer.

  • Page 83: What Is Liveshare

    WIReless­sCReen­sHaRe­(lIVesHaRe) ­ - -------------------------- What­is­lIVesHaRe? Liveshare is a wireless technology featured with Android operating system and used to reflect the screen of your mobile device which supports this feature to your television support- ing Liveshare. By using this technology you can share your device’s content, present a slide show or play your favorite game on a larger screen.

  • Page 84: Connecting A Pc

    PC­MonIToR­MoDe ­ - --------------------------------------------------------------------------------- Connecting­a­PC Sound Settings Parental Guidance Source Setup 1 Connect the socket »PC-IN« on the television Auto Adjust to the corresponding socket on the PC using Auto Adjust Mode a VGA cable. Position 0H-0V Size 2 Connect the »Audio« socket on the televi- Phase sion to the corresponding socket on the PC using a suitable cable. Change Area Back Exit note: Adjust your PC to the monitor (for example, 4­ Select the function and setting you want < > picture resolution 1280 x 768, picture fre- using »...

  • Page 85: What Is Common Interface

    oPeRaTIon­WITH­CoMMon­InTeRfaCe ­ - -------------------- What­is­common­interface? access­control­for­Ca­module­ and­smart­cards Common Interface (CI) is an interface for DVB receivers. 1 Open the menu with »MenU«. E ncrypted channels can only be viewed with a 2 Activate the menu item »Settings« with CA module suitable for the encryption system »oK«. and the corresponding smart card. 3 Select the menu item »Source Setup« with > < » « or » « and press »oK« to confirm. The television set is equipped with a Common – » Source Setup« menu is displayed. Interface slot into which CA modules from vari- ous providers can be inserted. 4 Select the line »Advanced« with » « or » « and press »oK« to confirm. Λ You can insert the provider’s smart card into the CA module in order to enable the en- 5 Select the line »CA–Module« with »...

  • Page 86: Searching For All Digital Television Chan- Nels From A Satellite Automatically

    ­ s PeCIal­seTTInGs ­ - --------------------------------------------------------------------------------------- searching­for­all­digital­televi- 8 Select Scan Type. To select whether you want to search for sion­channels­from­a­satellite­ only free digital television channels (Free), automatically only scrambled digital television channels New satellite channels are added or satellite (Scrambled) or both (Free + Scrambled), < > data is changed frequently. Therefore, we rec- press » « or » « and press oK« to select ommend you to run auto search function from and mark or unmark the »Free« and/or time to time. »Scrambled« items. All transponders are scanned for new channels. 9 Press the »...

  • Page 87: Searching For Digital Television Channels From A Satellite Manually

    sPeCIal­seTTInGs ­ - --------------------------------------------------------------------------------------- searching­for­digital­television­ lnb­settings channels­from­a­satellite­manu- notes: ally The following description about the LNB set- tings premise a substantial expertise about If a certain channel cannot be found with au- the satellite systems. Ask your specialist tomatic search, you can search it manually by dealer. manual search function. You must enter all pa- rameters of the channel correctly. You can ob- Your TV supports SCR system (Single Chan- tain the current transponder information from nel Router). If you are using SCR satellite teletext page, satellite TV magazines or internet.

  • Page 88: Motor Antenna Setup (Diseqc 1.2)

    sPeCIal­seTTInGs ­ - --------------------------------------------------------------------------------------- < » LNB Selection«: If more than one F rom »LNB selection« use » « or > satellites are used in the current SCR » « to make the selections between system, select »1/2« to»2/2« for the »1/16« and »16/16« for the satellite satellite corresponding to the relevant that corresponds to relevant DiSEqC < > positions using » « or » «. positions. – » LNB Power«: Set the LNB power to 8 Press »eXIT« to end the setting. »Off« or set it to »13/18V« or »14/19V« < depending on the LNB type by using » « Motor­antenna­setup­­ > or » «. (DiseqC­1.2) notes: Your television supports DiSEqC 1.2 motorized Use installation equipment supported / sug- satellite systems. This feature allows to control gested by your SCR Switch.

  • Page 89: Searching For Television Channels From The Cable Provider Automatically

    sPeCIal­seTTInGs ­ - --------------------------------------------------------------------------------------- DiseqC­1.2­settings searching­for­television­chan- nels­from­the­cable­provider­ Adjust the satellite antenna position according to each satellite. These settings can be stored and automatically the antenna can be moved to a preset position. 1 Open the menu with »MenU«. 1 Select the line »DiSEqC 1.2 SETTINGS« 2 Activate the menu item »Settings« with with » « or » « and press »oK« to con- Λ »oK«. firm. 3 Select the menu item »Source Setup« with – » DiSEqC 1.2 SETTINGS« menu is dis- > < » « or » « and press »oK« to confirm. played. 4 Select the line »Automatic Channel Search« 2 Use » « or » « to select necessary items. Λ...

  • Page 90: Searching For Television Channels From The Cable Provider Manually

    sPeCIal­seTTInGs ­ - --------------------------------------------------------------------------------------- searching­for­television­chan- note: You can speed up the search. To do this, nels­from­the­cable­provider­ frequency and network ID information are manually required. You may get this data from your 1 Open the menu with »MenU«. cable operator or find it in the Internet fo- rums.

  • Page 91: Searching For Digital Terrestrial Tv Chan- Nels Automatically

    sPeCIal­seTTInGs ­ - --------------------------------------------------------------------------------------- searching­for­digital­terrestrial­ note: The search can be aborted with »eXIT«. TV­channels­automatically 10 Switch to the Channel Editor with » « (yel- 1 Open the menu with »MenU«.  low) ; 2 Activate the menu item »Settings« with »oK«. 3 Select the menu item »Source Setup« with press »eXIT« to end the setting. > < » « or » « and press »oK« to confirm. 4 Select the line »Advanced Settings« with searching­for­digital­terrestrial­ » « or » « and press »oK« to confirm. Λ TV­channels­manually 5 Select the line »Active Antenna Power« with 1 Open the menu with »MenU«. » « or » «.

  • Page 92: Automatic Service Update

    sPeCIal­seTTInGs ­ - --------------------------------------------------------------------------------------- automatic­service­update­ Tuning­analogue­television­­ channels If this function is activated, possible changes of network operators are updated automatically. This setting is only necessary if you cannot re- ceive any digital channels and you have not car- The unit must be located in stand-by mode. ried out an analogue search during initial setup. This updating affects all types of reception - ter- The television channel can be set directly or restrial, cable and satellite. using the search. 1 Open the menu with »MenU«. setting­all­analogue­television­ 2 Activate the menu item »Settings« with channels »oK«. 3 Select the menu item »Source Setup« with The analogue television stations are listed in the >...

  • Page 93: Changing Stored Analogue Channels

    sPeCIal­seTTInGs ­ - --------------------------------------------------------------------------------------- note: 9 Select the line »Channel« with » « or » «. Λ To enter the channel number step by step, The search can be ended prematurely with < > press » « or » « or enter it directly with »eXIT«. »1…0« or 8 Press » « (yellow) to switch to the Chan-  start a automatic scan with » « (green) or  nel Editor; » « (yellow).  note: press »eXIT« to end the setting. »The current system is displayed in the »Sys- tem«. If the colour and/or sound is not func- Tuning­the­analogue­television­ tioning correctly, select »System« with » « < channels­by­entering­the­channel­ or » . Select the required setting with »...
  • Page 94 sPeCIal­seTTInGs ­ - --------------------------------------------------------------------------------------- Deleting­channels note: To enter other channel names, repeat steps 1 In the »Channel Editor« menu, select the 1­to 6. channel(s) you want to delete with » «, < > » «, » « or » «, and highlight the televi- Λ Creating­a­list­of­favourites­-­analog­ sion channel by pressing »oK«. channels –Channel is marked with »✔«. You can select your favourite channels and save note: them in up to four lists (FAV1 to FAV4). I f several TV channels are to be deleted, < > 1 In the »Channel Editor« menu, select the press » «, »...

  • Page 95: Displaying Signal Information

    sPeCIal­seTTInGs ­ - --------------------------------------------------------------------------------------- Displaying­signal­information Deactivate­and­activate­HbbTV (only for digital television channels) This option allows turning off Hbb TV feature, thus warnings shall not be displayed on chan- 1 Open the menu with »MenU«. nels with Hbb TV feature. 2 Activate the menu item »Settings« with 1 Open the menu with »MenU«. »oK«. 3 Select the menu item »Source Setup« with 2 Activate the menu item »Settings« with > < » « or » « and press »oK« to confirm. »oK«. 3 Select the menu item »Source Setup« with – » Source Setup« menu is displayed. > <...

  • Page 96: Other Data

    InfoRMaTIon ­------------------------------------------------------------------------------------------------- GRUnDIG­fIne­aRTs­55­flX­9491­ Reception­range: satellite:­ Ku band 10700MHz - 12750MHz Product­fiche Modulation: DVBS QPSK, DVBS2 QPSK, 8 PSK IF band 950 MHz - 2150 MHz energy­efficiency­class Signal level: -25dBm to -65 dBm Cable: screen­size: F ull band 110MHz 862MHz 139 cm/55“ Modulation:16QAM, 32QAM, Power­consumption: 64QAM, 128QAM and 256QAM i n operation mode 110 W / 175 W max. Symbol rate:4.0Msym/s to 7.2Msym/s in off position 0 W Digital­(DVb-T): annual­power­consumption: V HF/UHF Band width 7 MHz 161 kWh and 8 MHz FFT size: 2k, 8k stand-by­power­consumption: Modulation: 1 6QAM, 64QAM,QPSK < 0.50 W Security range: 1 /4, 1/8, 1/16, 1/32 Max.­resolution:...

  • Page 97: Service Information For Dealers

    1999/5/EC: Regulations on Radio and Tele- Short range device applications with broadband communications Terminal Equipment. modulation with DSSS and other than FHSS. To receive a copy of declaration of compliance The maximum average density value for short (DoC) visit: range device applications with broadband http://www.grundig.com/download/doc . You modulation with DSSS and other than FHSS is can access the declaration of compliance by 100mW e.i.r.p. running your television model on the product For only the purpose of compiling telemetry data model search section by entering the model num- for automatic monitoring and source estimation ber on the cover of the user's manual.

  • Page 98: Network Interfaces

    InfoRMaTIon ­------------------------------------------------------------------------------------------------- network­interfaces This product is intended for connection to the ADSL network. Disposing­of­the­packaging The packing materials are dangerous for chil- dren. Keep the packing materials out of the reach of children. The packing of your product is manufactured from recyclable materials. Dispose by classify- ing in accordance with waste instructions. Do not dispose along with normal household waste.

  • Page 99: Troubleshooting

    InfoRMaTIon ­------------------------------------------------------------------------------------------------- Troubleshooting If the remedies given below do not work, please consult an authorised GRUNDIG dealer. Please bear in mind that malfunctions can also be caused by external devices such as video recorders or satellite receivers. Problem Possible­cause Remedy Screen lit (snow), but no Antenna cable Is the antenna cable connected? station No TV station programmed Start a station search Poor picture contrast Picture settings incorrectly set Adjust the brightness, contrast or colour setting Problem at station Test with a different station Interference to picture Interference from other devices Change the position of the device and/or sound Ghosting, reflection Channel setting Automatic or manual channel set- ting/fine tuning Antenna Have antenna cable or system checked No colour Colour intensity at maximum Turn up the colour TV standard setting (if setting op- Select the correct colour standard tion is available) Problem at station Test with an another channel...
  • Page 100 InfoRMaTIon ­------------------------------------------------------------------------------------------------- Low image quality (pixel) DMS (for example PC) is con- Bring your DMS closer to the in WLAN mode nected to the wireless network modem and away from the modem Warnings about the con- Network Cable or wireless USB Check network cable or wireless nection problems on the network device may be discon- USB network device display nected Modem do not have Internet Make sure that your modem has connection or has problems Internet connection Videos in video applica- Internet connection speed is low. Low Internet speed is a problem tions are lagging during that is related with the speed of playback in wireless con- your subscription or a failure in nection the Internet infrastructure. Contact with your service provided (ISP). Videos in video applica- Internet connection speed is low. Low Internet speed is a problem tions are lagging during that is related with the speed of playback in cable con- your subscription or a failure in nection the Internet infrastructure. Contact with your service provided (ISP).

Table of Contents