Table of Contents
Advertisement
neTWoRKseTUP
Wirednetworksettings
There are two ways of making the wired network
settings.
a Automatic connection,
A ll data regarding connection settings (»IP Ad-
dress«, »Netmask«, »Gateway« and »DNS«)
are obtained from modem automatically.
b Manual connection,
a ll data regarding connection settings (»IP Ad-
dress«, »Netmask«, »Gateway« and »DNS«)
must be configured manually.
automaticconnection
Most of the home networks are Dynamic. If you
have a dynamic network, you must use a DSL
modem that supports DHCP. Modems and IP
sharers that support DHCP obtain the »IP Ad-
dress«, »Netmask«, »Gateway« and »DNS«
values required for internet access automatically,
and thus you are not required to enter those val-
ues manually.
1 Open the menu with »MenU«.
2 Activate the menu item »Settings« with
»oK«.
3 Select the menu item »Network Configura-
>
tion« with »
« or »
confirm.
– » Network configuration« menu is dis-
played.
Timer Applications
Change Connection Type
Network Configuration
Advanced
Connect
4 Select the line »Change Connection Type«
»
« or »
« and press »oK« to confirm.
V
Λ
5 Select the option »Wired« with »
and press »oK« to confirm.
36
enGlIsH
- ------------------------------------------------------------------------------------------
<
« and press »oK« to
TV Settings
Network Configuration
Wired
Auto
Test Connection
Change Area
Back
<
« or »
6 Select the line »Network Configuration«
with »
V
select »AUTO«.
7 With »
« (red) select »Connect« to establish
modem connection.
– » Connecting ... Please wait« message
will be displayed, and if the connection
is established »Connection To Gateway:
Success« message will be displayed.
8 Press »
settings and also if the local network and
internet connection has been established.
– » Testing ... Please wait« message will
be displayed, and if the connection is
established »Connection To Gateway:
Success«, »Internet Connection: Success«
message will be displayed.
9 Press »eXIT« to end the settings.
note:
If you do not have a dynamic network, fol-
7
low the instructions in manual connection
section.
OK
Exit
>
«
<
« or »
« and use »
Λ
« (green) to check the performed
>
« or »
« to
Advertisement
Table of Contents
