Table of Contents
Advertisement
sPeCIalseTTInGs
searchingfordigitaltelevision
channelsfromasatellitemanu-
ally
If a certain channel cannot be found with au-
tomatic search, you can search it manually by
manual search function. You must enter all pa-
rameters of the channel correctly. You can ob-
tain the current transponder information from
teletext page, satellite TV magazines or internet.
1 Open the menu with »MenU«.
2 Activate the menu item »Settings« with
»oK«.
3 Select the menu item »Source Setup« with
>
<
»
« or »
« and press »oK« to confirm.
4 Select the line »Manual Channel Search«
with »
« or »
« and press »oK« to con-
V
Λ
firm.
5 Select the option »Satellite« with »
and press »oK« to confirm.
6 Select the required items with »
– » Service Type«: Press »
whether you want to search for only televi-
sion channels (DTV), only radio channels
(Radio) or both (Radio+TV).
– » Scan Type«: Press »
whether you want to search for only free
digital television channels (Free), only
scrambled digital television channels
(Scrambled) or both (Free + Scrambled).
– » Transponder«: Enter channel frequency
with »1...0« as a 5-digit number.
– » Symbol Rate«: Enter channel symbol rate
with »1...0« as a 5-digit number.
– » Polarization«: Select the channel polar-
<
ization with »
« or »
or »Vertical«.
– » Network Search«: Select the network
<
search with »
«or »
7 Press »
« red button to start searching.
– T he »Digital Searching« menu appears,
and the scan for TV channels begins.
note:
The search can be aborted with »eXIT«.
7
8 Press »eXIT« to end the setting.
- ---------------------------------------------------------------------------------------
<
>
« or »
«
« or »
«.
V
Λ
<
>
« or »
« to select
<
>
« or »
« to select
>
« as »Horizontal«
>
« as »On« or »Off«.
lnbsettings
notes:
The following description about the LNB set-
7
tings premise a substantial expertise about
the satellite systems. Ask your specialist
dealer.
Your TV supports SCR system (Single Chan-
7
nel Router). If you are using SCR satellite
system, follow the steps described in »LNB
Type« section.
1 Open the menu with »MenU«.
2 Activate the menu item »Settings« with
»oK«.
3 Select the menu item »Source Setup« with
>
<
»
« or »
« and press »oK« to confirm.
4 Select the line »Manual Channel Search«
with »
« or »
« and press »oK« to con-
V
Λ
firm.
5 Select the option »Satellite« with »
and press »oK« to confirm.
6 Activate the option »Antenna Settings« with
»
« (blue).
– T he »Antenna Settings« menu is dis-
played.
7 Select the required items with »
– » Satellite«: Press »oK« and use »
»
« or »
« to pick the satellite you wish
V
Λ
to get the digital stations from and press
»oK« to confirm
– » Transponder«: »Press »oK«, and use
<
>
»
«, »
«, »
« or »
V
sponder and press »oK« to confirm. Use
»
« (red) to add a transponder, use »
(green) to delete it, or use »
to change transponder data
– » LNB Type«: Press »oK« and use »
>
or »
« to select the LNB type used in the
satellite system and press »
confirm. If you are using the SCR System,
please perform the »User Band«, »KB
Frequency« and »LNB Selection« settings.
» User Band«: Select the user band
number assigned to the user with »
>
or »
«.
» UB Frequency (MHz)«: Enter the
user band frequency assigned to the
user band with »1...0«.
<
>
« or »
«
«, »
«.
V
Λ
<
>
«, »
«,
« to select a tran-
Λ
«
« (blue)
<
«
« (green) to
<
«
ENGLISH
87
Advertisement
Table of Contents
