Connecting The Tv To A "Hidden" Network - Grundig Fine Arts 55 FLX 9491 SL Manual

neTWoRK­seTUP
Connecting­the­TV­to­a­"hidden"­
network
Even if the SSID (Service Set Identifier) of the
router is not visible, you can connect your TV to
this network.
1 Open the menu with »MenU«.
2 Activate the menu item »Settings« with
»oK«.
3 Select the menu item »Network Configura-
>
tion« with » « or »
confirm.
– » Network configuration« menu is dis-
played.
4 Select the line »Select Access Point« with
» « or » « and press »oK« to confirm.
V Λ
– » Select Access Point« menu appears and
available wireless networks are scanned
and displayed in the menu.
5 Press » « (red).

– » Add Network« menu appears.
6 Select the line »Access Point Name« with
» « or » « and press »oK« to confirm.
V Λ
– A menu for entering the SSID will be
displayed.
note:
For device to discover the wireless modem
7
on the network, the network name should
support ASCII characters.
7 Select the required character with »
< >
» «, » « or » « and move to the next
Λ
character with »oK«.
– U sing »shift« ➡ »oK«, you can switch
between uppercase letters / numbers and
lowercase letters / special characters.
– S elect » « to delete the character
entered and press »oK« to confirm.
8 Confirm the SSID by pressing »
9 Select the line »Security Type« with »
» « and select the required option (WEP,
Λ
WPA or WPA2) with »
­ - ------------------------------------------------------------------------------------------
<
« and press »oK« to
«,
V
« (green).

« or
V
< >
« or » «.
note:
If the »WPA« option is selected, the security
7
protocol (AES or TKIP) must be selected on
the line »Encryption«. This depends on the
settings on the router.
10 Confirm the setting with »
– T he network is now in the »Select Access
Point« menu.
11 Select the network with »
>
» « and press »oK« to confirm.
– W ireless connection password screen is
displayed.
12 Select the required character with »
< >
» «, » « or » « and move to the next
Λ
character with »oK«.
– U sing »shift« ➡ »oK«, you can switch
between uppercase letters / numbers and
lowercase letters / special characters.
– S elect » « to delete the character
entered and press »oK« to confirm.
13 Confirm the password by pressing »
(green).
– » Connecting ... Please wait« message will
be displayed.
14 Press »
« (green) to make sure that the

network connection is established with the
current settings.
– » Testing ... Please wait« message will
be displayed, and if the connection is
established »Connection To Gateway:
Success«, »Internet Connection: Success«
messages and MAC address will be
displayed.
15 Press »eXIT« to end the setting.
« (red).

<
«, » «, » « or
V Λ
«,
V
«

ENGLISH
43­