Information Timing; Mode Settings - Panasonic TH-98SQ2HW Operating Instructions Manual

Information timing

Set up the informing manner for no signal or
temperature rising.
RS-232C controls:
Warning or error message sent from the display
automatically.
LAN controls:
Acquire the warning or error message from the
display.
[Information timing] - submenu screen
Information timing
No signal warning
No signal warning timing
No signal error
No signal error timing
Temperature warning
■
[No signal warning]
When set to [On], the display sends out the no signal
warning.
■
[No signal warning timing]
Set up the detecting time for no signal warning.
(Range: 01 ‒ 60, Interval: 1 minute)
■
[No signal error]
When set to [On], the display sends out the no signal
error.
■
[No signal error timing]
Set up the detecting time for no signal error.
(Range: 01 ‒ 90, Interval: 1 minute)
●
The warning of [No signal warning] and the error
of [No signal error] are not sent when the no signal
state is detected through any of the following
functions:
[No signal power off], "Power management"
function for each input (see page 65)
Setting Example:
● If there is no signal when [HDMI1] is input, [HDMI1
power management] is activated first and the
Display enters the standby mode.
[No signal warning timing]: 5 minutes
[No signal error timing]: 10 minutes
[HDMI1 power management]: [On] (60 seconds)
Note
●
The [No signal error timing] cannot be set
shorter than [No signal warning timing].
●
Even when a USB memory or internal memory
is connected, if there is no playable file, the unit
determines no signal is present.
■
[Temperature warning]
When set to [On], the display sends out the warning
message.
On
5min
On
10min
On

Mode settings

Sets various operations.
[Mode settings] - sub menu screen
Mode settings
Display orientation Landscape
Image rotation
POWER button control setting
Power LED light-up setting
PC input mode
Use memory select
USB (DEVICE) connect setting
USB-C/SLOT select USB-C+SLOT
LAN terminal setting LAN terminal
■
[Display orientation]
Sets the on-screen display orientation in the portrait
setting.
[Landscape]:
On-screen display angle is for horizontal
installation.
[Portrait]:
The on-screen display rotates clockwise by 90
degrees for easy view in the portrait setting.
Note
:
98-inch model
Power indicator
●
In the portrait setting, the power indicator shall come
to the right side.
86-inch model 75-inch model
55-inch model
50-inch model
Power indicator
●
In the portrait setting, the power indicator shall come
to the upper side.
Off
Off
Off
PC
USB
Auto
65-inch model
:
43-inch model
English
97