Table of Contents
Advertisement
3
Complete the detailed settings and
click [Next].
In this window, DNS server and HOSTNAME (up
to 20 characters) settings can be made as well as
address information set on the [LAN setup] menu of
the display.
After all required items have been entered, click
[Next]. Then, a confirmation window appears when
[EAP] is set to [NONE].
When [EAP] is set to items other than [NONE], the
next page appears.
Lower than Version 1.5000 (before IPv6
compatible)
Version 1.5000 and later (after IPv6 compatible)
Note
●
When [DHCP ON] is set, if the DNS server
address is acquired from the DHCP server, the
acquired address is valid.
When [EAP] is set to items other than [NONE] or [EAP-
TLS]
110
English
When [EAP] is set to [EAP-TLS]
[USER NAME]
Enter the user name for authentication with one-byte
alphanumeric characters (excluding space). (Up to
64 characters)
[PASSWORD]
Enter the password for authentication with one-byte
alphanumeric characters. (Up to 64 characters)
[Back], [Next]
Click [Back] to return to the previous screen.
Click [Next] to display the screen to confirm the
setting contents.
[DIGITAL CERTIFICATE]
Register the electronic certificate (extension: PFX)
for authentication.
[CA CERTIFICATE]
Register the CA certificate (extension: CER) for
authentication.
Note
●
When [EAP] is [EAP-TLS], date and time need to be
set on the adjust clock page (see page 111).
4
Click [Submit].
The settings will be registered.
Lower than Version 1.5000 (before IPv6
compatible)
Version 1.5000 and later (after IPv6 compatible)
Advertisement
Table of Contents
