[Auto Discovery]
Set the standby process against the search protocol of the control system and the application software.
[Auto Discovery]
[Disable]:
Disables the standby process.
[Enable]:
Enables the standby process and enables the
automatic detection of the Display.
[XiO Cloud]
Configure the setting to control devices using XiO Cloud.
[XiO Cloud]
[Disable]:
Disables the XiO Cloud function.
[Enable]:
Enables the XiO Cloud function.
[Proxy]
Configure the proxy server setting.
[Proxy]
[Disable]:
Does not use the proxy server.
[Enable]:
Uses the proxy server.
[Proxy Server Name]
Enter the proxy server name or IPv4 address.
[Submit]
Update the [Auto Discovery] setting.
[Submit]
Update the [XiO Cloud] setting.
[Proxy Server Port No.]
Enter the port number of proxy server.
[Submit]
Update the [Proxy] setting.
Note
●
[Proxy Server Name] does not support the IPv6
address.
125
English