Table of Contents
Advertisement
Initialization
When both main unit buttons and remote control buttons
are disabled due to the [Button lock], [Controller user
level] and [Controller ID function] settings, set all the
values [Off] so that all the buttons are enabled again.
Press <- (Unit)> together with <RETURN>
and hold for more than 5 seconds.
[Shipping] is displayed and the lock is released when
it disappears.
Shipping
Yes
●
Settings for [Button lock], [Controller user level]
and [Controller ID function] will be back to [Off].
Initializing the
[Controller user
level]
When remote control buttons are disabled due to the
[Controller user level] (page 99) setting, set the value
[Off] so that all the buttons are enabled again.
Press <SETUP> and hold for more than
5 seconds.
●
Setting for [Controller user level] will be back to [Off].
182
English
No
Software on this unit
The availability of functions described in these
operating instructions differs depending on the main
microcomputer version of the main unit software.
These functions cannot be used in the following
versions.
Lower than Ver.1.5000
[IPv6 settings] (see page 82)
Lower than Ver.2.4000
[Quick start] confirmation screen at startup (see
page 37)
Lower than Ver.2.5000
[Signal] input display (see page 56)
[Clock adjust setting] (see page 77)
Setting memories for number buttons by selecting
[Function button settings] - [Memory load] (see page
89)
Screen monitor function on the Input information
page (see page 109)
Lower than Ver.2.6000
[Crestron XiO Cloud] (see page 125)
The operation differs in the following version.
Ver.2.4000 or later
"Power management" function (see page 65)
When [Quick start] is set to [On],
approx. 20 seconds are required to turn off the
power in each input when pictures (sync signal) are
not detected.
The version of the main microcomputer can be checked
by accessing [Setup]-[Options]-[Display information].
(see page 92)
To use the above functions, update the main unit
software to the latest version.
For the main unit software information, visit the following
website.
https://panasonic.net/cns/prodisplays/pass/
Advertisement
Table of Contents
