Table of Contents
Advertisement
Note
●
Deleting the rows "S", "G", "P" or "E" will not overwrite
the deleted setting items. The original setting contents
are retained.
●
When the row "I" is deleted, it will be set to [ON]
automatically.
●
Be sure to fill in the rows of the fixed character and
IP address.
●
If the network setting fails with this function, an error
message is displayed.
If fails, the network setting is not changed.
Be sure to confirm the file description, and insert the
USB memory device again.
●
This function operates only when a file with the above
file name exists in the USB memory device.
●
Use one-byte alphanumeric characters to describe
file contents.
Copying the USB memory data to the
display
1
Insert the USB memory device to
the USB terminal on the side of the
display.
2
The [LAN setup] screen is displayed
after data copy has finished.
3
Remove the USB memory device from
the USB terminal.
USB terminal
USB memory
175
English
Advertisement
Table of Contents
