Table of Contents
Advertisement
Generating the self-signed certificate
When the server certificate issued by the certification organization is not to be used as the security certificate, it is
possible to use the self-signed certificate generated in the Display. Generate the self-signed certificate after generating
the CRT key.
1
Click [Certificate] → [Self-signed Certificate] → [Generate] → [Execute].
The page to generate the self-signed certificate is displayed.
2
Enter the information required for generation.
The details of each item are as follows.
Item
[Common Name] Enter the Display name or the IP address set in the Display.
Enter the country code defined in ISO 3166-1 alpha-2 (two upper
[Country]
case alphabets).
[State]
Enter the State, etc.
[Locality]
Enter the locality.
[Organization]
Enter the organization name.
[Organization
Enter the organization unit name.
Unit]
[CRT key]
[Last modified]
3
Click [OK].
Self-signed certificate is generated.
Note
●
The characters that can be input are as follows.
Single-byte numbers: 0 to 9
•
Single-byte alphabets: A to Z, a to z
•
Single-byte symbols: - . _ , + / ( )
•
[RSA key size] The key length of the current CRT key is displayed.
The generation date and time of the current CRT
key is displayed.
Details
Character length limit
64 characters
―
128 characters
128 characters
64 characters
64 characters
―
―
English
121
Advertisement
Table of Contents
