Table of Contents
Advertisement
■
[Video playback mode]
Sets the video playback mode.
If image disturbance occurs at the switching timing of
motion picture files during playback in [Standard] mode,
switch to [Adjust] mode.
[Standard]: Plays without a black image at the joint
between video files.
[Adjust]: Plays with a black image (approx.
2 seconds) inserted at the joint between
video files.
Note
●
When using the Multi Media Player, a black screen is
displayed for a certain period of time at the switching
timing of motion picture files regardless of the [Video
playback mode] settings.
●
The display may be disturbed at the switching timing
of files during playback in [Standard] mode.
●
When the schedule playback is proceeding using
"Content Management Software", [Video playback
mode] can be switched both in single mode and multi
mode.
■
[Resume play]
Set resume play off/on.
■
[Still picture rotation]
Sets the display method of still pictures by USB/Internal
Memory input.
[Landscape]:
Displays still pictures horizontally.
[Portrait]:
Displays still pictures vertically.
[Exif information]:
The display rotates according to the file
information.
Note
●
[Exif information] performs the rotation operation only
in the JPEG format to which Exif information is added.
In the JPEG format or BMP format where EXIF
information is not detected, the operation when
[Landscape] is selected is performed.
■
[Playlist edit]
Creates / Edits the scenario file (scenario.dat).
For details of [Playlist edit], refer to "Playlist edit
function" (see page 134).
■
[Scenario file check]
Checks the memory selected for [Use memory select].
When an error is detected, the error code and file name
are displayed.
For details of the error codes, refer to "USB memory
contents check". (see page 132)
Select [Scenario file check] with
<ENTER>.
Scenario file check
Available
Note
●
When the schedule playback is proceeding using
"Content Management Software", [Scenario file
check] is disabled.
■
[Codec information]
Displays the codec information of a motion picture/still
picture file being played on the USB media player.
The file is analysed on execution, and the codec
information is displayed after the completion of the
analysis.
Note
●
The file analysis takes time in proportion to the
number of files in the USB memory device.
●
A black screen appears during analysis because
playback is stopped.
●
Incompatible with the schedule play mode.
■
[Internal memory]
Performs operation of data within the internal memory.
Note
●
[Internal memory] to be operated is the one used for
the USB media player. (It is different from [Internal
memory] in the WhiteBoard function.)
●
When using the internal memory, refer to [Use
memory select]. (see page 98)
●
The capacity of the internal memory is approx. 3 GB.
[Internal memory] - submenu screen
Internal memory
Copy from USB memory
All data delete
[Copy from USB memory]:
Copies data from the USB memory device to the
internal memory.
[All data delete]:
Deletes data in the internal memory.
■
[Slide show duration]
Select the displaying duration for still images.
[10 sec] to [600 sec]
Note
●
When the schedule playback is proceeding using
"Content Management Software", [Slide show
duration] is disabled.
and press
87
English
Advertisement
Table of Contents
