Shipping Condition; Initialization - Panasonic TH-75EQ1W Operating Instructions Manual

Shipping condition

It is possible to reset the following data to the factory
settings.
Settings and set values of [Picture], [Sound], [Setup] and
[Position] menus and user image registered in [Setup] -
[Image settings]
■
Remote control
1
Press <SETUP> to display the [Setup]
menu.
2
Select [Options] with
<ENTER>.
The following screen will be displayed.
Options
Display information
Software licenses
Cloning password
USB data cloning
LAN data cloning
Output log data
Shipping
3
Select [Shipping] with
<ENTER>.
Shipping
Yes
4
Select [Yes] with
<ENTER>.
The message [Shipping ( Wait a moment )] will be
displayed.
5
After the message [Please turn off
the power.] is displayed, turn the
power off pressing <Main Power On /
Off button> (
●
If the <Main Power On / Off button> is locked,
please disconnect the AC cord plug from the wall
outlet.
and press
and press
No
and press
).
■
Unit
1
Press <MENU (Unit)> for several
times and display the [Setup] menu.
2
Select [OSD language] with
then press and hold <ENTER (Unit)>
for more than 5 seconds.
3
Select [Yes] with <- (Unit)> and press
<ENTER (Unit)>.
The message [Shipping ( Wait a moment )] will be
displayed.
4
After the message [Please turn off
the power.] is displayed, turn the
power off pressing <Main Power On /
Off button> (
●
If the <Main Power On / Off button> is locked,
please disconnect the AC cord plug from the wall
outlet.

Initialization

When both main unit buttons and remote control buttons
are disabled due to the [Button lock], [Controller user
level] and [Controller ID function] settings, set all the
values [Off] so that all the buttons are enabled again.
Press <- (Unit)> together with <RETURN>
and hold for more than 5 seconds.
[Shipping] is displayed and the lock is released when
it disappears.
Shipping
Yes
●
Settings for [Button lock], [Controller user level]
and [Controller ID function] will be back to [Off].
, and
).
No
English
121