Installing The Lower Triple Clamp - KTM 500 EXC F 2024 Owner's Manual

12.12

Installing the lower triple clamp

Main work
–
Clean the bearing and sealing elements, check for damage,
and grease.
High viscosity grease (
–
Insert the lower triple clamp with the steering stem. Mount
upper steering head bearing.
–
Push on protective ring
W00319-11
–
Make sure the steering lock in area
The catch on the steering lock engages in the notch on
the triple clamp.
W00549-10
–
Position the upper triple clamp and handlebar.
–
Mount screw
W00353-11
–
Position the fork legs.
Bleeder screws
Info
Grooves are milled into the side of the upper end of the
fork legs. The second milled groove (from the top) must
be flush with the upper edge of the upper triple clamp.
The pressure and rebound damping is located in the
left and right fork leg.
W00297-13
SERVICE WORK ON THE CHASSIS 12
p. 154)
1
.
A
is positioned correctly.
2
, but do not tighten it yet.
3
are positioned toward the front.
65