12 SERVICE WORK ON THE CHASSIS
12.11
64
K00546-10
Removing the lower triple clamp
W00353-10
W00354-10
–
Position the brake caliper, and mount and tighten screws
Guideline
Screw, front
M8
brake caliper
–
Mount the cable ties.
–
Position the brake line, the wiring harness, and the clamp.
Mount and tighten screws
Finishing work
–
Install the front wheel.
–
Remove the motorcycle from the lift stand. (
Preparatory work
–
Raise the motorcycle with the lift stand. (
–
Remove the front wheel.
–
Remove the fork legs.
(
–
Remove the headlight mask with the headlight. (
–
Remove the front fender. (
–
Remove the seat. (
p. 72)
–
Remove the fuel tank.
–
Take off the handlebar cushion.
Main work
–
1
Loosen screw
.
–
2
Remove screw
.
–
Take off the upper triple clamp with the handlebar and hang
them to the side.
Info
Cover the components to protect them against damage.
Do not kink the cables or lines.
–
3
Remove protective ring
–
Take off the lower triple clamp with the steering stem.
–
Remove the upper steering head bearing.
25 Nm (18.4 lbf ft)
Loctite
5
.
(
p. 105)
p. 60)
p. 60)
(
p. 104)
p. 62)
p. 114)
p. 68)
(
p. 79)
.
4
.
®
243™