12 SERVICE WORK ON THE CHASSIS
12.6
12.7
12.8
12.9
62
Installing the fork protector
V00332-11
Removing the frame protector
W00310-10
Installing the frame protector
W00310-11
Removing the fork legs
–
Position the fork protector on the left fork leg. Mount and
1
tighten screws
.
Guideline
Remaining screws,
chassis
–
Position the brake line, wiring harness, and clamp. Mount and
2
tighten screws
.
–
Position the fork protector on the right fork leg. Mount and
3
tighten screws
.
Guideline
Remaining screws,
chassis
–
Remove the cable ties.
–
1
Remove screws
with the bushings.
–
Take off the left frame protector.
–
Push the right frame protector to the front and take off at the
bottom.
–
Position the left frame protector.
–
Insert the right frame protector from below and push it to the
rear.
–
1
Mount screws
with the bushings and tighten.
Guideline
Screw, frame protec-
tor
–
Secure the frame protector with cable ties.
Preparatory work
–
Raise the motorcycle with the lift stand. (
–
Remove the front wheel.
M6
10 Nm (7.4 lbf ft)
M6
10 Nm (7.4 lbf ft)
M5
3 Nm (2.2 lbf ft)
p. 60)
(
p. 104)