Performing Soft System Resets (Resets 3, 4, And 5) - Extron electronics FOX 4G Matrix 3200 User Manual

Operation, cont'd

Performing soft system resets (resets 3, 4, and 5)

Perform a soft reset of the switcher as follows:
1.
2.
3-30 FOX 4G Matrix Switchers • Operation
Use an Extron Tweeker or other small screwdriver to press and hold the rear
panel Reset button until the rear panel Reset LED and the front panel View
and Esc buttons blink once (events reset), twice (IP settings reset), or three
times (absolute reset).
Press and hold
the Reset button.
Events
Reset 3 seconds
RESET
(Mode 3)
View and Esc buttons flash once.
Press and hold
the Reset button.
IP Settings
Reset
6 seconds
RESET
(Mode 4)
View and Esc buttons flash twice.
Press and hold
the Reset button.
Absolute
Reset
9 seconds
RESET
(Mode 5)
View and Esc buttons flash three times.
Release the Reset button and then immediately press and release the Reset
button again. Nothing happens if the second momentary press does not occur
within 1 second.
Release, then immediately
Reset LED flashes once.
press and release again.
CONTROL
VIEW ESC
T
Release, then immediately
Reset LED flashes twice.
press and release again.
CONTROL
T VIEW ESC
Reset LED flashes
Release, then immediately
three times. press and release again.
CONTROL
T VIEW ESC