Ethernet.connection; Default Ip Address; Pinging.to.determine.the Extron.ip.address - Extron electronics FOX 4G Matrix 3200 User Manual

Configurable fiber optic digital matrix switchers
Table of Contents

Advertisement

Ethernet Connection
Ethernet Link
The rear panel Ethernet connector on the FOX 4G matrix
switcher can be connected to an Ethernet LAN or WAN.
This connection makes SIS control of the switcher possible
using a computer connected to the same LAN.
Ethernet connection
The Ethernet cable can be terminated as a straight-through cable or a crossover
cable and must be properly terminated for your application (figure A-1).
• Crossover cable — Direct connection between the computer and the
• Patch (straight-through) cable — Connection of the FOX 4G matrix switcher
12345678
Insert Twisted
Pair Wires
Connector
Figure A-1 — RJ-45 connector pinout tables

Default IP address

To access the FOX 4G matrix switcher via the LAN port, you need the switcher's
IP address. If the address has been changed to an address comprised of words and
characters, you can determine the actual numeric IP address using the ping utility.
If the address has not been changed, the factory-specified default is 192.168.254.254.
Ping can also be used to test the Ethernet link to the FOX 4G matrix switcher.
Pinging to determine the Extron IP address
The ping utility is available at the DOS prompt. Ping tests the Ethernet interface
between the computer and the FOX 4G matrix switcher. Ping can also be used to
determine the actual numeric IP address from an alias and to determine the web
address.
Ping the switcher as follows:
1.
2.
3.
4.
A-2
FOX 4G Matrix Switchers • Ethernet Connection
FOX 4G matrix switcher
to an Ethernet LAN
Crossover Cable
Pins:
End 1
Pin
Wire color
1
White-green
2
Green
3
White-orange
4
Blue
5
White-blue
6
Orange
7
White-brown
8
Brown
T568A
RJ-45
A cable that is wired as T568A at one end
and T568B at the other (Tx and Rx pairs
reversed) is a "crossover" cable.
On the Windows task bar, click on Start > Run.
At the Open prompt, type command.
Click the OK button.
At the DOS prompt, type ping {IP address} and then press
computer returns a display similar to the one shown on the next page.
The line Pinging ... reports the actual numeric IP address, regardless of
whether you entered the actual numeric IP address or an alias name.
Straight-through Cable
End 2
End 1
Wire color
Pin
Wire color
White-orange
1
White-orange
Orange
2
Orange
White-green
3
White-green
Blue
4
Blue
White-blue
5
White-blue
Green
6
Green
White-brown
7
White-brown
Brown
8
Brown
T568B
T568B
A cable wired the same at both ends is
called a "straight-through" cable, because
no pin/pair assignments are swapped.
End 2
Wire color
White-orange
Orange
White-green
Blue
White-blue
Green
White-brown
Brown
T568B
. The
Enter

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fox 4g matrix 7200

Table of Contents