Table of Contents
Advertisement
Preferences menu
Immediate Changes — Causes configuration changes to take
effect immediately.
Hold/Verify Changes — Delays implementation of
configuration changes until the Changes – Take button
is pressed.
Ties as Lines — Displays ties as lines (below).
Ties as Crosspoints — Displays ties as a matrix of inputs and outputs (figure 5-17).
Ties that have been made are indicated as amber or green boxes. Ties that
will take effect when you click the Take button are indicated by +. Ties that
will be broken when you click the Take button are indicated by –.
Figure 5-17 — Ties shown as crosspoints
Link-detection options — Allows you to set the link detection feature as follows:
•
To automatically refresh the display every 10 seconds.
•
To update the display whenever you refresh the screen.
•
To never sample and display the link status
Icons in I/O Boxes — Erases any numbers in the I/O boxes in the Control
Program window (figure 5-6). You can place icons in the boxes.
Numbers in I/O Boxes — Erases any icons in the I/O boxes in the
Control Program window and fills each box with the associated
input or output number.
Catch FPC/others changes — When checked, sets the switcher to report all
configuration and setting changes to the serial port or Ethernet connection
that turned this selection on. These reports allow the Matrix Switchers
Control Program to track the changes that occur in the switcher's
configuration and settings, whether commanded via the front panel,
either serial port, or the Ethernet port.
FOX 4G Matrix Switchers • Matrix Software
5-21
Advertisement
Table of Contents
